ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE CLIP AND CABLE AND SAUCER Manual

AnoGotcha™

Parts

Cable and
Saucer AnoGotcha Shell
16-0018SS

Instructions for Hanging

Step 1

Insert T-Top Gotcha Holder into
AnoGotcha Shell. Fig. 1

Step 2

Place cable onto inner channel of Cable
Clip. The cable should snap
into place. Fig. 2
Note: For OneUp Application place
the MultiClip in the center of the
AnoGotcha Holder.

Step 3

Align one end of the Cable Clip with the
top channel of the aluminum holder. Then
insert one round end, then press down on
the other round end and slide Cable Clip
into rail. Fig. 3

Step 4

Push end caps into place. Fig. 4

Step 5

Snap the AnoGotcha Holder open and
insert poster (top and bottom). To close,
snap the AnoGotcha Holder shut. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoGotcha
Holder, End Caps, Cable Clips and
MultiClips for future projects.
™
AnoQuick™ and AnoGotcha
trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales
agent may be held liable for injury, loss or damage resulting from the use
of these products. Part #02INSAnoGotchaCableClipSaucer
Incept-9.27.02
OneUp Instruction Sheet
12AG400
®
are trademarks and Gotcha is a registered
T-Top Gotcha
12GT100
Figure 1
Figure 3
Figure 5
Cable Clip End Caps
06-5050
Figure 2
Figure 4
Figure 6
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
06-5525