Related Manuals for ACV HR s 1000
Summarization of Contents
Product Information
Energy Labelling
Details the energy efficiency class and consumption metrics for different models.
Product Fiche
Provides manufacturer details, product models, and energy performance data.
Rating Plate
Explains the information found on the product's rating plate, including technical specifications.
User's Guide
Thermostat
Explains the function and operation of the thermostat, including its legend and wiring.
Appliance Description
Provides an overview of the product models and their components.
HR s 320 - 600 Models
Details the components of the HR s 320-600 model via a legend.
HR s/Jumbo 800 - 1000 Models
Details components of HR s/Jumbo 800-1000 models, including the Jumbo casing.
Technical Characteristics
Dimensions
Details the physical dimensions for HR s models with soft casing.
Tank Clearance
Specifies clearance requirements for HR s models, including D1, D2, and Height.
Jumbo Tank Dimensions
Presents physical dimensions for Jumbo models with metal casing.
Jumbo Tank Clearance
Outlines clearance requirements for Jumbo models, including D1, D2, and H.
Electrical Characteristics
Details electrical specifications for HR s models, including voltage and frequency.
Hydraulic Characteristics
Lists hydraulic data such as total capacity, connections, and pressure drop.
Performance
Presents DHW performance metrics and maximum operating conditions.
Installation
Packing Contents
Lists the items included in the packaging for HRS and Jumbo tanks.
Tools
Illustrates the essential tools required for installation.
Safety Instructions
Provides critical safety guidelines for installation and operation.
G3 Requirements and Guidance
Details building regulations and guidance for discharge pipe arrangements.
Preparation of the Tank (HR s type with soft casing)
Shows steps for preparing the HR s type tank with a soft casing.
Preparation of the Tank (Jumbo type with metal casing)
Illustrates the assembly process for the Jumbo type tank with a metal casing.
Connection
Offers essential safety and operational instructions for connecting the tank.
Connection to the DHW Circuit
Illustrates the typical floor installation connection to the DHW circuit.
Connection to the Primary Circuit
Shows a typical floor installation diagram for the primary circuit connection.
Parallel Tank Assembly
Describes recommended assembly for waste heat recovery and district heating.
Connection Kits (Option)
Details available connection kits for HR s and Jumbo/HR s types.
Starting Up
Safety Instructions to Fill the Tank
Provides safety precautions for filling the DHW tank.
Filling the DHW Tank
Explains the procedure for filling the DHW tank with water.
Filling the Primary Circuit
Details the process for filling the primary circuit with water or antifreeze.
Checks Before Starting Up
Lists essential checks to perform before putting the system into operation.
Maintenance
Periodic Checks by the User
Outlines routine checks the user should perform on the system.
Annual Maintenance
Describes the annual maintenance service to be performed by an engineer.
Draining
Provides instructions and safety precautions for draining the tank.
Draining the Primary Circuit
Details the procedure for draining the primary circuit.
Draining the DHW Tank
Explains the steps for draining the DHW tank.
Bringing Back into Service After Maintenance
Refers to the "Starting Up" chapter for post-maintenance procedures.
Need help?
Do you have a question about the HR s 1000 and is the answer not in the manual?
Questions and answers