Related Manuals for Polon-Alfa IGNIS 2040
Summarization of Contents
1 INTRODUCTION
1.1 DOCUMENTATION CONTENTS
Overview of the operation and maintenance documentation's purpose and contents.
1.2 CONTROL PANEL APPLICATION
Details the intended uses and functionalities of the IGNIS 2040 fire control panel.
1.3 SAFETY CONDITIONS
Covers essential safety precautions for installation, operation, and maintenance.
1.4 DEFINITIONS
Explains key terms and concepts used throughout the manual for clarity.
4 DESIGN DESCRIPTIONS
4.1 GENERAL CHARACTERISTICS
Outlines the main features and capabilities of the control panel design.
4.2 OVERALL DIAGRAM
Presents a schematic diagram of the control panel's internal connections.
4.3 CONTROL PANEL GENERAL DESCRIPTION
Describes the physical appearance, mounting, and basic layout of the control panel.
4.4 CONTROL PANEL GENERAL OPERATION PRINCIPLE
Explains the fundamental working principle of the IGNIS 2040 control panel.
4.5 MODULE ARRANGEMENT
Details the arrangement of internal modules and components within the control panel.
5 CONTROL PANEL OPERATION MODES
5.1 QUIESCENT MODE
Describes the panel's standby state when no fire event is detected.
5.2 ALARM MODE
Details indications and procedures during a fire alarm event.
5.3 FAULT MODE
Explains fault signalling, causes, and actions for system malfunctions.
5.4 DISABLEMENT MODE
Covers the procedure for disabling and re-enabling panel functions.
5.5 TESTING MODE
Outlines the process for testing fire warning devices and panel functions.
6 POWER SUPPLY
6.1 BASIC POWER SUPPLY
Details the primary mains power source and its specifications.
6.2 RESERVE POWER SUPPLY
Explains the reserve battery power supply and its operation.
7 INSTALLATION
7.1 CONTROL PANEL MOUNTING
Provides instructions for physically mounting the control panel on a wall.
7.2 WIRING
Covers the guidelines and procedures for wiring detection, alarm, and control lines.
10 MAINTENANCE
10.1 GENERAL RULES
Outlines general principles and requirements for maintaining the fire alarm system.
10.2 PERIODICAL TESTING
Details the scope and frequency of periodical tests for the system components.
10.3 FUSE REPLACEMENT
Explains the procedure and types of fuses used in the control panel.
Need help?
Do you have a question about the IGNIS 2040 and is the answer not in the manual?
Questions and answers