Table of Contents
Related Manuals for Extreme Networks 16804
Summarization of Contents
Industrial Series Switch Overview
Package Checklist
Lists the items included in the switch package for verification.
Safety Instructions
Provides essential safety precautions for handling and installing the switch.
Technical Specifications
Details the hardware capabilities, power, environmental, and mechanical parameters.
Faceplate and Panels
Illustrates and identifies the physical ports and indicators on the switch front panel.
Alarm Relay and Ground Connection
Explains the alarm relay output contacts and ground connection points.
LED Status Indicators
Describes the meaning and states of various LED indicators on the switch.
Installation
Mounting the ISW (DIN-Rail)
Step-by-step guide for mounting the switch onto a DIN-rail.
Mounting the ISW (Wall)
Instructions for attaching the switch to a wall using mounting plates.
Connecting the Ethernet Interface (RJ45 Ethernet)
Details on connecting network devices using RJ45 Ethernet ports.
Connecting the Ethernet Interface (Fiber)
Explains how to connect network devices using SFP fiber optic ports.
Connecting the Power Terminal Block
Guide for connecting the DC power supply to the terminal block.
Console Connection
Steps for establishing a console connection for management.
Configuration
Connecting & Logging in to the Switch
Instructions for initial connection and login to the switch interface.
Web Browser Support
Recommended browser settings for accessing the web management interface.
Regulatory and Compliance Information
Federal Communications Commission (FCC) Notice
FCC compliance statement for the device's radio frequency emissions.
Industry Canada NoticeCAN ICES-3 (A)/NMB-3(A)
Industry Canada compliance statement for radio noise emissions.
Product Safety
Lists international safety standards the product complies with.
Electromagnetic Compatibility (EMC)
Statement regarding the product's compliance with EMC directives.
Glossary
ad hoc mode
Defines ad hoc mode as an 802.11 networking framework without an access point.
ARP
Explains Address Resolution Protocol (ARP) for mapping IP to MAC addresses.
ATM
Defines Asynchronous Transmission Mode (ATM) for character data transfer.
BSS
Defines Basic Service Set (BSS) as a wireless topology with an access point.
Chalet
Describes Chalet as a web-based user interface for switch setup.
CHAP
Explains Challenge-Handshake Authentication Protocol (CHAP) for PPP connections.
CLI
Defines Command Line Interface (CLI) for managing switches and appliances.
Data Center Connect
Describes Data Center Connect (DCC) as a fabric management tool.
DoS attack
Defines Denial of Service (DoS) attacks and their impact on network resources.
Need help?
Do you have a question about the 16804 and is the answer not in the manual?
Questions and answers