Memorising A Speed; Cancelling The Memorised Speed; Changing A Memorised Speed; Disarming The Cruise Control - PEUGEOT 607 Manual

128
CRUISE CONTROL
Cruise control enables the vehicle to
maintain a steady speed programmed
by the driver, regardless of the road
characteristics and without the driver
having to touch the accelerator or
brake pedals.
In order for it to be memorised, the
vehicle speed must be greater than
25 mph (40 km/h) or 40 mph (60
km/h), (according to engine).
15-07-2002
YOUR 607 IN DETAIL
Operation
Place the ring of switch 1 in the ON
position. The indicator light
will come on accompanied
by an audible signal.
A speed can be memorised.
Place the ring of switch 1 in the
OFF position to cancel.

Memorising a speed

As soon as you reach the chosen
speed, push stalk 1 upwards or
downwards. This memorises the
speed, which will be maintained
automatically.
Note : it is possible to accelerate
momentarily without disarming the
cruise control.
Cancelling the memorised
speed
If you wish to cancel the memorised
speed :
Pull stalk 1 towards you or press
the brake or clutch pedal.
Recalling the memorised
speed
After cancellation, flick
1 upwards or downwards. Your vehicle
will return to the last memorised speed.

Changing a memorised speed

To memorise a speed higher than
the previous one:
keep stalk 1 pressed upwards;
release it when you have reached
the required speed.
To memorise a speed lower than the
previous one :
keep stalk 1 pressed downwards;
release it when you have reached
the required speed.

Disarming the cruise control

place the ring in the OFF position
or switch off the ignition.
Do not use cruise control
on slippery roads or in
heavy traffic.
stalk