Changing A Bulb; Front Lights - PEUGEOT 607 Manual

144

CHANGING A BULB

Front lights

In the engine compartment, remove the style cover secured
by one or two butterfly screws, a plastic retainer clip and
two screws.
Note: handle the bulbs with a dry cloth.
1 - Dipped beam headlamps: H7-55W or Xenon bulb.
WARNING: RISK OF ELECTROCUTION
Xenon bulbs must be replaced by a PEUGEOT
dealer.
2 - Main beam headlamps: H1-55W.
Turn the protective cover of the faulty bulb a quarter
of a turn and remove it.
Disconnect the connector.
Press the end of the securing clip to free it. Change
the bulb.
When fitting the new bulb, ensure that the direction
notches are positioned correctly and the securing
clip is fixed properly.
15-07-2002
PRACTICAL INFORMATION
Reconnect the connector.
Refit the protective cover.
The headlamps are fitted with polycarbonate glass with a
protective coating. Do not clean them with a dry or abra-
sive cloth, nor with a detergent or solvent product.
3 - Side lights: W 5 W.
Pull the socket rearwards, remove the bulb and
change it.
4 - Direction indicators: PY 21 W (amber).
Turn the bulb holder a quarter turn and remove it.
Change the bulb.
Refit the style cover.
Front foglamps: H1 - 55 W.
Note: In certain climatic conditions (low temperature,
humidity), condensation on the inside surface of the
headlamp glass is normal ; it disappears a few minutes
after the lights are switched on.