Satellite Navigation System - PEUGEOT 607 Manual

SATELLITE NAVIGATION
SYSTEM
Introduction
The satellite navigation
guides you, by means of vocal and
visual instructions (graphics), to
your chosen destination.
The heart of the system lies in the
use of a map data base and GPS
(Global Positioning System). With
this system you can fix the position
of your vehicle by means of a satel-
lite network.
The system uses the following ele-
ments:
– the control pad,
– the CD-ROM drive,
– the last voice message and route
change recall control,
– the map data in CD-ROM format,
– the monochrome or colour screen.
Certain functions or services
described may vary depending
on the version of CD-ROM or the
country where the vehicle is sold.
15-07-2002
YOUR 607 IN DETAIL
The control pad
This lets you select and confirm the functions, controls and programmes dis-
played. It is located by the side of the screen.
system
Dial; this has two functions:
– Rotation of the dial:
This allows you to move round the screen and thus select a
function.
It also allows you:
– with a 'setting' type parameter, after selection, to increase
or decrease the value,
– with a 'list' type parameter, to open the list and scroll
through the values.
– Pressing the dial:
This allows:
– confirmation of the selected function or the modified value.
– selection of a 'setting' or 'list' type parameter for modifica-
tion.
– cancelling of a superimposed display.
'MENU' button:
This allows access at any time to the general menu.
'MODE' button:
– brief press:
– monochrome screen C: selection of functions (audio sys-
tem, navigation / guidance...),
– colour screen: access to the list of controls (context menu)
of the function being displayed.
– Pressing for more than two seconds puts the screen on standby.
'ESC' button:
– brief press: cancelling of operation in progress and return to the
previous screen or erasing of a superimposed display.
– pressing for more than two seconds returns to the welcome
screen.
71