Table of Contents
Advertisement
INSTRUCTION MANUAL
HR662/802/672/812
HRC662/672/802/812
Grassland walk behind flail mower
Read this instruction manual carefully before any use of the machine, keep it as a reference. For any
question about this manual, please report to your OREC dealer or to the distributor of your country or
to : http://www.orec-jp.com.
Update : August 2018
Advertisement
Table of Contents
Related Manuals for OREC HR802
Summarization of Contents
Introduction
Forward to the User
General guidance and safety prerequisites for operating the mower.
Check List
Instructions to the Dealer
Procedures for dealers before machine delivery to the customer.
Checks Before Delivery
Pre-delivery inspection points for the mower.
Checks on Delivery
Checks to be performed when handing over the mower.
Controls
Driving Clutch Lever
Operation of the lever controlling machine movement.
Blade Clutch Lever
Operation of the lever controlling the cutting blade engagement.
Throttle Lever
Adjustment of engine speed via the throttle lever.
Side Clutch Levers
Control of machine direction using side clutch levers.
Handlebar Adjustment Levers
Adjustment of handlebar position for user comfort.
Speed Lever
Selection of forward and reverse speeds.
Choke Lever
Operation of the choke for starting a cold engine.
Fuel Cock
Operation of the fuel shut-off valve.
Height of Cut Control
Adjustment of the cutting deck height.
Engine On/Off Switch
Controls for starting and stopping the engine.
Crawler Lock Lever (Optional)
Operation of the crawler lock for specific models.
Operation
Starting of the Engine
Step-by-step instructions for starting the engine.
Mowing
Procedures for operating the mower during grass cutting.
Maintenance Operations to be Carried out by the User
Daily Maintenance, Before Start Mowing
Essential checks before each use of the machine.
Belts Adjustment
Belt from Engine to Counter Shaft
Adjustment of the belt connecting engine and counter shaft.
Belt from the Counter Shaft to the Flails
Adjustment of the belt connecting counter shaft and flails.
Belt Transmission Adjustment
Adjustment of the belt in the transmission system.
Blade Brake
Checking and maintenance of the blade brake system.
Breakdowns and Solutions
Engine Does Not Start
Troubleshooting steps for engine starting issues.
The Machine Does Not Travel
Troubleshooting steps for machine mobility problems.
The Machine Does Not Stop
Troubleshooting steps for machine stopping issues.
The Blade Does Not Rotate
Troubleshooting steps for blade rotation problems.
Tightening Torques (Nm)
Specifications for tightening torque values for various fasteners.
Limited Warranty
Notes
Additional remarks or information related to the warranty.
Need help?
Do you have a question about the HR802 and is the answer not in the manual?
Questions and answers