Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Topcon SR-3AR
Summarization of Contents
1. Before Use
1.1 Confirmation of Contents
Verifies that all necessary parts and accessories are included with the unit.
1.2 Parts and Functions
Identifies and describes the functions of the instrument's various parts.
1.3 Preparations
Covers crucial setup procedures before measurement.
1.4 Maintenance Recommended Display
Advises on recommended maintenance and calibration schedules.
2. Measurement Procedures
2.1 Single Measurement
Step-by-step guide for performing a single measurement.
2.2 Auto Run
Instructions for performing automatic continuous measurements.
2.3 Difference Measurement
Method for measuring the differences between samples.
2.4 Displaying Measurement Data
How to view previously stored measurement results.
2.5 Measuring
Examples and techniques for different measurement scenarios.
3. Settings
3.1 Function Mode
Introduces the instrument's function mode for adjustments.
3.2 Table Colors
Allows selection of colorimetric systems for data display.
3.3 Measurement Mode
Details the different measurement modes available.
3.4 Integral Time Delay Function
How to enable and set the integral time delay function.
3.5 Single or Auto Run
Choice between single measurement and continuous auto run.
3.6 Measuring Speed
Configuration of measurement speed modes.
3.7 PC Connection Method
Setting up the connection type (USB or RS-232C) to a PC.
3.8 RS-232C Parameters
Configuration of RS-232C communication parameters.
3.9 Data Communication Methods
Selection of data communication methods.
3.10 Remote Command Terminal Codes
Setting terminal codes for PC communication.
3.11 Using a Correction Factor
Enabling or disabling spectral and XYZ correction factors.
3.12 Displaying and Editing the Correction Factor
Setting and viewing correction factors.
3.13 CIE Color Matching Function (Visual field)
Selecting the CIE color matching function for visual field.
3.14 CIE Color Matching Function (Type)
Selecting the CIE color matching function type.
3.15 Measurement Averaging
Option to enable or disable averaged measurements.
3.16 Selection of "Over Range" Detection in MANU
Enabling/disabling over range error detection.
3.17 Buzzer
Setting the buzzer sound ON or OFF.
3.18 Luminance Display Format
Setting the luminance display format.
3.19 Maintenance Reminder Screen
Configuring the behavior of the maintenance reminder.
3.20 Panel Light Control
Automatically controlling the status of the LCD screen and LEDs.
3.21 Batch Deletion of Measurement and DIF Standard Data
Performing bulk deletion of measurement and standard data.
4. Communication with Personal Computer
4.1 Communication Commands
Lists commands for PC communication and their functions.
4.2 Output Formats
Describes the format of data returned from the instrument.
4.3 USB Driver Installation
Steps for installing the USB driver on a PC.
5. Error Display
5.1 Error Display on the Instrument
Lists instrument error messages and their remedial measures.
5.2 Error Code in Communication
Lists communication error codes and their descriptions.
6. Appendix
Specifications and Performance
Detailed technical specifications and performance data.
Block Diagram
Visual representation of the instrument's internal components.
SR-LEDW/SR-UL2/SR-UL1R/SR-3AR Mathematical Formulas
Formulas used for calculations and measurements.
External Dimension Diagram
Diagrams illustrating the physical dimensions of the instrument.
Need help?
Do you have a question about the SR-3AR and is the answer not in the manual?
Questions and answers