Advertisement
Advertisement
Table of Contents
Related Manuals for Topcon KR-1W
Summary of Contents for Topcon KR-1W
- Page 1 INSTRUCTION MANUAL WAVE-FRONT ANALYZER KR-1W...
- Page 3 • Auto alignment and auto start functions enabling quick measurement under best conditions. PURPOSE OF THIS MANUAL This text outlines the TOPCON Wave-front Analyzer KR-1W and describes basic operations, troubleshooting, checking, maintenance and cleaning. To encourage the safe, efficient use of this instrument, carefully read "DISPLAYS AND SYMBOLS FOR SAFE USE"...
-
Page 4: Displays And Symbols For Safe Use
DISPLAYS AND SYMBOLS FOR SAFE USE To encourage safe and proper use and to prevent danger to the operator and others or potential damage to property, warnings and cautions are placed on the instrument body and inserted in the manual. We suggest that everyone understand the meaning of the following displays, icons and text before reading the "GENERAL SAFETY INFORMATION"... -
Page 5: General Safety Information
When operating the instrument, be not touch the patient's eye or nose. [Inform the patient accordingly] The safety and effectiveness of the Wave-front Analyzer KR-1W has not been established for use of the device as an accessory interfaced to the refractive laser for the treatments of the higher order aberrations of the eye by photorefractive keratectomy (PRK), phototherapeutic keratectomy (PTK), or laser assisted in situ keratomileusis (LASIK). - Page 6 Electromagnetic Compatibility (EMC) This instrument has been tested (with 100/120/230V) and found to comply with IEC 60601-1- 2:2014+AMD1:2020 (Ed.4.1). This instrument may emit a radio frequency energy (within the standard) and cause an adverse effect on the devices located nearby. When such effect is confirmed by the ON/OFF operation, a proper treatment as to change the direction, use another outlet, etc.
-
Page 7: Warning Indications And Positions
To ensure safety, this machine provides warning displays. Use the instrument correctly by observing the display instructions. If any of the following display labels are missing, contact your TOPCON dealer at the address listed on the back cover. Label Meaning WARNING To avoid injury caused by electric shock, do not open the cover. -
Page 8: Checkpoints For Maintenance
CHECKPOINTS FOR MAINTENANCE Checkpoints by the user (1) Periodically measure the supplied model eye ball to check the precision. (2) Clean the measurement window if it is dirty. (3) Clean the facerest or chin-rest if they are dirty. (4) Apply a dust cover when the instrument is not in use. See "MAINTENANCE AND CHECKING"... -
Page 9: General Information On Usage And Mainte- Nance
• To understand and follow instructions when undergoing an examination. INTENDED USER PROFILE The Wave-front Analyzer KR-1W is a precision electrical instrument for medical use which must be used under the guidance and instructions of a doctor. ENVIRONMENTAL CONDITIONS OF USE Temperature: 10°C to 40°C... - Page 10 ENVIRONMENTAL CONDITIONS FOR PACKAGING IN TRANSPOR- TATION (Product in its normal transport and storage container as provided by manufacturer) Temperature: -40°C to 70°C Humidity: 10% to 95% Pressure: 700hPa to 1060hPa ELECTRIC RATING Supply voltage: 100-240VAC, 50-60Hz Power input: 160VA DIMENSIONS AND WEIGHT Dimensions: 304(W)x521(D)x474-504(H)mm...
- Page 11 DISPOSAL • When disposing the instrument and/or parts, follow the local regulations for disposal and recy- cling. This symbol is applicable for EU member countries only. To avoid potential damage to the environment and possibly human health, this instrument should be disposed of (i) for EU member countries - in accordance with WEEE (Direc- tive on Waste Electrical and Electronic Equipment), or (ii) for all other countries, in accordance with local disposal and...
-
Page 12: Reference Material
REFERENCE MATERIAL ABOUT THE BARCODE AND THE QR CODE OF THE BACK COVER The barcode and the QR code of the back cover indicates the parts management. Parts management code 12345678-01-A Printed in Japan 2102-100LW... - Page 13 OPERATING AND USAGE METHOD Usage method Connect the power supply cord to a commercial power source. When externally connected devices are used, connect them and turn ON the power source (if it has a power switch). Turn ON the power switch. Set measurement mode (ref/kerato, ref, kerato) if required.
- Page 15 Period of use: Please inform us of the date of purchase. Defective condition: Please provide us with as much detail as possible on the problem. WAVE-FRONT ANALYZER KR-1W INSTRUCTION MANUAL Revision 4.00 Date of issue 2024-3-29 Published by TOPCON CORPORATION...
- Page 16 WAVE-FRONT ANALYZER KR-1W Parts management code Printed in Japan 2403-100TH...
Need help?
Do you have a question about the KR-1W and is the answer not in the manual?
Questions and answers