Nikon 9235 - Coolscan III Reference Manual page 8

Installation
If you are connecting your scanner for the first time, do not
connect the scanner until you have completed installation of Nikon
Scan. Follow the steps below to complete installation.
Step 1—Turn the computer on
Turn the computer on and wait for the operating system to
start up.
Click here
If an earlier version of Nikon Scan is already installed on your
system, before upgrading to version 3 you will need to uninstall
the existing version of Nikon Scan. To uninstall Nikon Scan,
click the Start button and select the uninstaller from under
Nikon Scan in the Programs sub-menu.
Nikon Scan 3 offers full support for the scanners supported
under version 2.x. Users of Nikon Scan 2 can enjoy the im-
proved functionality of Nikon Scan 3 while continuing to use
their existing scanners.
Getting Started: Installation
Windows
to proceed to the next step.
Step 1—Turn the computer on
Turn the computer on and wait for the operating system to
start up.
Click here
If an earlier version of Nikon Scan is already installed on your
system, before upgrading to version 3 you will need to uninstall
the existing version of Nikon Scan. To uninstall Nikon Scan,
insert the Nikon Scan CD into the CD-ROM drive and start the
installer. In the main install dialog, select Uninstall from the
pop-up menu at the top left corner of the dialog, then click the
Uninstall button to uninstall Nikon Scan.
Nikon Scan 3 offers full support for the scanners supported
under version 2.x. Users of Nikon Scan 2 can enjoy the im-
proved functionality of Nikon Scan 3 while continuing to use
their existing scanners.
Installing Nikon Scan
Macintosh
to proceed to the next step.
7