Table of Contents
Advertisement
Setting up a Scan
The Layout Tools, Information, and Crop Palettes
Layout Tools
The Layout Tools palette contains tools for use both in the scan
window and in image windows opened in Nikon Scan applet
when Nikon Scan is used as a stand-alone application. In the
scan window, the layout tools are used to select the portion of
the image to be scanned and to set the focus point for autofocus
operations. In image windows, they are used to scroll the im-
age, zoom it in and out, and select part of the image to be cop-
ied to the clipboard. The flip and rotate tools in the Layout
Tools palette can be used to correct the orientation of images
both in the scan window and in image windows.
Reference: The Tool Chest
The Layout Tools palette contains the following controls:
Control
The image orientation display takes the
form of a capital letter "R." Any flips or
rotations performed on the image are
reflected in the orientation of the let-
Image Orientation
ter; if the letter is shown in red, the im-
age has been flipped from its original
orientation.
This tool is only available if Nikon Scan
is being used as a stand-alone applica-
tion and an image has been opened in
the Nikon Scan applet, when it can be
Hand Tool
used to scroll images that are too big to
fit in the image window. For details, see
tive, the hand tool is disabled.
When the crop tool is active, a selec-
tion can be made by dragging the cur-
sor over an image. In the scan window,
this tool is used to select a portion of
the image to be scanned and opened in
the host application (see
Crop Tool
Nikon Scan is used as a stand-alone ap-
plication and an image window is active
in the Nikon Scan applet, it duplicates
the function of the Selection Cursor.
For details, see
Description
95. When the scan window is ac-
96.
33). When
43
Advertisement
Table of Contents
