Nikon 9235 - Coolscan III Reference Manual page 30

Step 5—Select the frames to be scanned
If you are using a multi-frame adapter, you can select the frames to be scanned from the thumbnail drawer. Click the thumbnail
drawer tab to open the drawer as shown below.
Multi-frame adapters
A multi-frame adapter is an adapter that allows you to scan more than one frame of a film roll or strip film without having to
remove the media from the adapter between scans. The following multi-frame adapters are available for the Nikon scanners
supported under Nikon Scan 3:
• the SA-21 (4000 ED/COOLSCAN IV ED) and SA-20 (LS-2000/COOLSCAN III) strip-film adapters
• the IA-20 (S) adapter for APS (IX-240) film (sold separately)
• the SA-31 film-roll adapter for the 4000 ED (sold separately)
• the SF-200 (S) slide feeder for the 4000 ED and LS-2000 (sold separately; note that because the SF-200 (S) can preview only
one frame at a time, the thumbnail drawer is not available when this adapter is in use)
Tutorial: Making a Scan 29