Nikon 9235 - Coolscan III Reference Manual page 137

The following options are available:
Option
If this item is checked, an autofocus op-
Auto focus eration is performed as necessary when
the Preview button is clicked.
Auto exposure Check this item to perform an autoexpo-
for positive sure operation as necessary when pre-
film viewing film positives.
Auto exposure Check this item to perform an autoexpo-
for negative sure operation as necessary when pre-
film viewing film negatives.
Check this item to perform multi-sample
scanning during the preview operation
(4000/LS-2000 only). Multi-sample scan-
ning will not be performed if Normal
(1x) is selected for multi-sample scanning
Multi
in the Scanner Extras palette. Note that
sampling
selecting this option will increase the
amount of time needed to make a pre-
view, while the effects of multi-sample
scanning may not be visible in the preview
area at the normal zoom ratio.
Reference: Preferences
Description
Option
Check this item to remove the effects of
dust and scratches during the preview
operation. This operation will only be
performed when Enable Digital ICE is
Digital ICE
checked in the Digital ICE Cubed palette.
Note that selecting this option will in-
crease the amount of time needed to
make a preview.
Check this item to store the last preview
Cache preview created with the MA-20 (S) slide mount
image for slide adapter. This preview will be displayed the
mount next time Nikon Scan is started or when
adapter the MA-20 (S) is next inserted in the
scanner.
* Once an autofocus or autoexposure operation has been per-
formed for the current frame, the operation will not be re-
peated before a preview or scan. If desired, you can use the
autofocus and autoexposure buttons in the scan window to
ensure that these operations are performed before preview-
ing or scanning images. If Perform autofocus when film
is inserted is selected in the Scanner Extras palette, an
autofocus operation will automatically be performed when a
slide is inserted in a slide-mount adapter, with the result that
an autofocus operation will not be performed automatically
before the image is previewed.
Description
136