Table of Contents
Advertisement
Appendix C
When Nikon Scan does not function as expected (see
the program. This appendix describes how to uninstall and reinstall Nikon Scan on both the Macintosh and Windows platforms.
It also explains the Custom Install option available in the Macintosh version of the Nikon Scan installer.
Reinstalling Nikon Scan
Before reinstalling Nikon Scan, you will need to uninstall the program.
Step 1—Export saved settings to a safe location
If you have saved settings using the Save Settings or Set User
Settings options in the scan window or tool palette settings
menus, load the settings by selecting the settings name from the
end of the settings menu or, in the case of user settings, by
selecting Reset to User Settings. Then, using the Export...
option, save the settings to a new location outside the Nkscan30
folder. Repeat this process until all saved settings have been
exported to a new location.
Click
here
Appendix C: Reinstall/Custom Install
Appendix B,
Windows
to proceed to the next step.
"Troubleshooting"), it may indicate that you need to reinstall
Step 1—Export saved settings to a safe location
If you have saved settings using the Save Settings or Set User
Settings options in the scan window or tool palette settings
menus, load the settings by selecting the settings name from the
end of the settings menu or, in the case of user settings, by
selecting Reset to User Settings. Then, using the Export...
option, save the settings to a new location outside the Nikon
Scan 3.0 folder. Repeat this process until all saved settings have
been exported to a new location.
Click
here
Reinstall/Custom Install
Macintosh
to proceed to the next step.
148
Advertisement
Table of Contents
