McAfee VSF09EMB1RAA - VirusScan Plus 2009 User Manual page 96

94 McAfee VirusScan Plus
Banning computer connections
You can add, edit, and remove banned IP addresses in the
Banned IPs pane.
You can ban computers that are associated with unknown,
suspicious, or distrusted IP addresses from connecting to your
computer.
Since Firewall blocks all unwanted traffic, it is normally not
necessary to ban an IP address. You should ban an IP address
only when you are sure that an Internet connection is a threat.
Make sure that you do not block important IP addresses, such as
your DNS or DHCP server, or other ISP-related servers.
Add a banned computer connection
You can add a banned computer connection and its associated IP
address.
Note: Ensure that you do not block important IP addresses, such
as your DNS or DHCP server, or other ISP-related servers.
1
On the McAfee SecurityCenter pane, click
Network, then click Configure.
2
On the Internet & Network Configuration pane, under
Firewall protection is
3
On the Firewall pane, click
4
On the Banned IPs pane, click Add.
5
If the computer connection is on an IPv6 network, select the
IPv6 check box.
6
Under Add Rule, do one of the following:
Select Single, and then enter the IP address in the
Address box.
Select Range, and then enter the starting and ending IP
addresses in the
boxes. If your computer connection is on an IPv6 network,
enter the starting IP address and the prefix length in the
From IP Address
7
Optionally, select
days to enforce the rule.
8
Optionally, type a description for the rule.
9
Click OK.
10 Click
Yes to confirm.
enabled, click Advanced.
Banned IPs.
From IP Address and
and Prefix Length
Rule expires in, and enter the number of
Internet &
IP
To IP Address
boxes.