McAfee VSF09EMB1RAA - VirusScan Plus 2009 User Manual page 103

Modify a system service port
You can modify inbound and outbound network access
information about an existing system service port.
Note: If port information is entered incorrectly, the system
service fails.
1
On the McAfee SecurityCenter pane, click
Network, then click Configure.
2
On the Internet & Network Configuration pane, under
Firewall protection is
3
On the Firewall pane, click
4
Click the check box beside a system service, and then click
Edit.
5
In the System Services pane, under
Rule, modify the following:
System service name
Local TCP/IP ports
Local UDP ports
6
Do one of the following:
To open the port to any computer on a trusted, standard,
or public network (for example, a home network, a
corporate network, or an Internet network), select
Trusted, Standard, and
To open the port to any computer on a standard network
(for example, a corporate network), select
(includes Trusted).
7
If you want to send this port's activity information to another
Windows network computer that shares your Internet
connection, select
network computers that use Internet Connection
Sharing.
8
Optionally, describe the modified configuration.
9
Click OK.
Chapter 19 Introduction
enabled, click Advanced.
System Services.
Add System Service
Public.
Forward this port's network activity to
101
Internet &
Standard