McAfee VSF09EMB1RAA - VirusScan Plus 2009 User Manual page 94

92 McAfee VirusScan Plus
Edit a computer connection
You can edit a trusted, standard, or public computer connection
and its associated IP address.
1
On the McAfee SecurityCenter pane, click
Network, then click Configure.
2
On the Internet & Network Configuration pane, under
Firewall protection is
3
On the Firewall pane, click Networks.
4
On the Networks pane, select an IP address, and then click
Edit.
5
If the computer connection is on an IPv6 network, select the
IPv6 check box.
6
Under Edit Rule, do one of the following:
Select Single, and then enter the IP address in the
Address box.
Select Range, and then enter the starting and ending IP
addresses in the
boxes. If your computer connection is on an IPv6 network,
enter the starting IP address and the prefix length in the
From IP Address
7
Under Type, do one of the following:
Select Trusted
trusted (for example, a computer in a home network).
Select Standard
(and not the other computers in its network) is trusted (for
example, a computer in a corporate network).
Select Public
public (for example, a computer in an Internet café, hotel,
or airport).
8
Optionally, check
days to enforce the rule.
9
Optionally, type a description for the rule.
10 Click OK.
Note: You cannot edit the default computer connection that
Firewall automatically added from a trusting private network.
enabled, click Advanced.
From IP Address
and Prefix Length
to specify that this computer connection is
to specify that this computer connection
to specify that this computer connection is
Rule expires in, and enter the number of
Internet &
IP
and To IP Address
boxes.