Ignoring Protection Problems - McAfee VSF09EMB1RAA - VirusScan Plus 2009 User Manual

Ignoring protection problems

If SecurityCenter detects a non-critical problem, you can either
fix or ignore it. Other non-critical problems (for example, if
Anti-Spam or Parental Controls are not installed) are
automatically ignored. Ignored problems are not shown in the
protection category information area on the SecurityCenter
Home pane, unless your computer's protection status is green. If
you ignore a problem, but later decide that you want it to appear
in the protection category information area even when your
computer's protection status is not green, you can show the
ignored problem.
Ignore a protection problem
If SecurityCenter detects a non-critical problem that you do not
intend to fix, you can ignore it. Ignoring it removes the problem
from the protection category information area in SecurityCenter.
1
Under Common
2
On the SecurityCenter Home pane, click the protection
category in which the problem is reported.
3
Click the Ignore link beside the protection problem.
Show or hide ignored problems
Depending on its severity, you can show or hide an ignored
protection problem.
1
Open the Alert Options pane.
How?
1. Under Common
2. On the right pane, under
Information, click Configure.
3. Under Alerts, click Advanced.
2
On the SecurityCenter Configuration pane, click
Problems.
3
On the Ignored Problems pane, do the following:
To ignore a problem, select its check box.
To report a problem in the protection category
information area, clear its check box.
Chapter 4 Introduction
Tasks, click Home.
Tasks, click Home.
SecurityCenter
19
Ignored