McAfee VSF09EMB1RAA - VirusScan Plus 2009 User Manual page 107

View inbound events
If logging is enabled, you can view inbound events. Inbound
Events include the date and time, source IP address, host name,
and information and event type.
1
Ensure the Advanced menu is enabled. On the Common
Tasks pane, click
2
Under Recent Events, click
3
Click Internet &
Note: You can trust, ban, and trace an IP address from the
Inbound Event log.
View outbound events
If logging is enabled, you can view outbound events. Outbound
Events include the name of the program attempting outbound
access, the date and time of the event, and the location of the
program on your computer.
1
On the Common Tasks pane, click
2
Under Recent Events, click
3
Click Internet &
Note: You can allow full and outbound-only access for a program
from the Outbound Events log. You can also locate additional
information about the program.
View intrusion detection events
If logging is enabled, you can view inbound intrusion events.
Intrusion Detection events display the date and time, the source
IP, the host name of the event, and the type of event.
1
On the Common Tasks pane, click
2
Under Recent Events, click
3
Click Internet &
Detection Events.
Note: You can ban and trace an IP address from the Intrusion
Detection Events log.
Chapter 20 Introduction
Reports & Logs.
View Log.
Network, and then click
Reports &
View Log.
Network, and then click
Reports &
View Log.
Network, and then click
105
Inbound Events.
Logs.
Outbound Events.
Logs.
Intrusion