McAfee VSF09EMB1RAA - VirusScan Plus 2009 User Manual page 102

100 McAfee VirusScan Plus
Configure a new system service port
You can configure a new network service port on your computer
that you can open or close to allow or block remote access on
your computer.
1
On the McAfee SecurityCenter pane, click
Network, then click Configure.
2
On the Internet & Network Configuration pane, under
Firewall protection is
3
On the Firewall pane, click
4
Click Add.
5
In the System Services pane, under
Rule, enter the following:
System Service name
System Service category
Local TCP/IP ports
Local UDP ports
6
Do one of the following:
To open the port to any computer on a trusted, standard,
or public network (for example, a home network, a
corporate network, or an Internet network), select
Trusted, Standard, and
To open the port to any computer on a standard network
(for example, a corporate network), select
(includes Trusted).
7
If you want to send this port's activity information to another
Windows network computer that shares your Internet
connection, select
network computers that use Internet Connection
Sharing.
8
Optionally, describe the new configuration.
9
Click OK.
Note: If your computer has a program that accepts either web or
FTP server connections, the computer sharing the connection
may need to open the associated system service port and allow
forwarding of incoming connections for those ports. If you are
using Internet Connection Sharing (ICS), you also need to add a
trusted computer connection on the
information, see Add a computer connection.
enabled, click Advanced.
System Services.
Add System Service
Public.
Forward this port's network activity to
Networks
Internet &
Standard
list. For more