Table of Contents
Advertisement
The following three tables describe the functionality of the connection device when
connecting to a host system with the NVIDIA NVS 120M graphics adapter.
Connection Device with NVIDIA NVS 120M
Single monitor connected
to the top DVI connector
(See note 1)
On screen display
POST
Desktop
Connection Device with NVIDIA NVS 120M
Single monitor connected
to the bottom DVI
connector (See note 1)
On screen display
POST
Desktop
Connection Device with NVIDIA NVS 120M
Dual monitors
connected (See note
1)
On screen display
POST
Desktop
Notes:
1. Monitor emulation must be enabled in the compression card settings on the host
system. Monitor emulation is enabled when configuring a session, for more
information see Chapter 3, "Setting up the connection between the connection
device and the host system," on page 9. When monitor emulation is enabled,
KVM access for the host system is not available.
2. When using dual monitors, the primary video connector is the top DVI
connector. You must configure the desktop to support dual monitors through the
video driver settings in the operating system.
3. The bottom DVI connector must be used when administrator access is also
required through remote control or KVM. For remote control and KVM access,
note the supported resolutions listed in the remote control session. See the
"IBM BladeCenter Management Module User's Guide" for a list of supported
resolutions when accessing the BladeCenter unit using remote control through
the management module.
Top DVI
Connector
Video
Video
Video
Top DVI
Connector
No video
No video
No video
Top DVI Connector
Video
Video
Video
Video (See note 2)
Chapter 2. Installing the CP20 Workstation Connection Device
AMM KVM
Bottom DVI
Management
Connector
Capability
No video
No video
No video
No video
No video
AMM KVM
Bottom DVI
Management
Connector
Capability
Video
Video
Video
Video (see note 2)
AMM KVM
Bottom DVI
Management
Connector
Capability
No video
Not supported
Not supported
N/A
N/A
Video
N/A
7
Advertisement
Table of Contents
