Table of Contents
Advertisement
The following illustration shows the connectors on the rear of the connection device.
Connection device on/off switch: Press this switch to power-on or power-off the
IBM CP20 Workstation Connection Device.
AC Adapter port: Connect the AC adapter to this connector to supply power to the
IBM CP20 Workstation Connection Device.
USB ports: Connector for a USB device, such as a mouse or keyboard.
LAN port: Connect your local area network cable to this connector.
Digital Video Connection 1: Connect a monitor to this connector. This connector is
the primary video connector.
Digital Video Connection 2: Connect a monitor to this connector.
Speaker/headphone: Connect a speaker or headphones to this connector.
3
Chapter 1. Introduction
Advertisement
Table of Contents
Need help?
Do you have a question about the CP20 - Workstation Connection Device KVM and is the answer not in the manual?
Questions and answers