Chapter 1. Introduction - IBM CP20 - Workstation Connection Device KVM Installation Instructions Manual

Chapter 1. Introduction

The IBM
a host system, such as the IBM BladeCenter HC10 Type 7996 host system. The
following illustration shows the light emitting diodes (LEDs), controls, and
connectors on the front of the connection device.
Note: The illustrations in this document might differ slightly from your hardware.
Attention:
as shown in the illustrations. Operating it in any other orientation might cause
damage to the connection device.
Blade server power LED: When this LED is lit, it indicates that the hosted blade
server is powered on.
Note: When the blade server power LED is blinking, the IBM CP20 Workstation
CP20 power LED: When this LED is lit, it indicates that the IBM CP20 Workstation
Connection Device is on.
© Copyright IBM Corp. 2008
®
CP20 Workstation Connection Device Type 3096 is intended for use with
See the documentation that comes with your system for additional
instructions.
The connection device is designed to operate in a vertical orientation,
Connection Device is connected to the hosted blade server, but the blade
server might be in standby or hibernation mode.
1