Page 5
This guide contains instructions on how to install and use the IBM 15-inch Flat Panel Monitor Speaker Bezel on an IBM T541H Flat Panel Monitor. This is a supplement to the Installation User’s Guide, part number 22P8993, that ships with option part number 22P8986.
Page 6
Identifying connectors on the flat panel monitor speaker bezel The following illustration identifies the connectors on the flat panel monitor speaker bezel. 1 Volume control 2 Power button 3 Power light-emitting diode (LED) 4 Headphone connector 5 Audio cable (3 m) 6 Power cable (18 in.) Mounting and attaching your flat panel monitor speaker bezel Follow these instructions to mount and attach your flat panel speaker bezel to your...
Page 7
Attaching your flat panel monitor speaker bezel Removing the back panels from your T541H flat panel speaker Removing the back panels will allow access to the power connector on the T541 flat panel monitor for attachment of the bezel speaker power cord.
Page 8
2 DC power plug 3 DC power receptable (not required for T541H) Attention: Do not attach a power adapter to this repetacle while attached to the T541H. 1. Locate the cables on your flat panel monitor speaker bezel. The dc power cable 1 is hardwired to your speaker bezel.
Page 9
Your flat panel monitor will look similar to one of the following illustrations. IBM T541H monitor 6. Replace the back panels on your IBM T541H flat panel monitor. 7. Connect the audio cable of the speaker bezel to the audio speaker connector on your computer.
Need help?
Do you have a question about the T541H and is the answer not in the manual?
Questions and answers