Related Manuals for Lutz SL
Summarization of Contents
General System Overview
1. Hazard
Details potential dangers associated with the flow meter system's operation.
2. Safety Information
Explains safety symbols used in the manual and their meanings.
3. Scope of Supply
Instructions for checking delivered goods upon receipt to ensure completeness.
Basic Flow Meter
1. Proper Use
Describes the correct and intended application of the basic flow meter, including limitations.
1.1 Explosion Hazard Area Use
Outlines requirements and precautions for using the flow meter in explosion-risk areas.
1.2 Technical Data
Provides detailed technical specifications for various basic flow meter types.
1.7 Measurement Accuracy and Flow
Explains how flow rate affects the measurement accuracy of the device.
2. Installation
Provides instructions for the physical installation of the basic flow meter.
3. Maintenance and Servicing
Covers procedures for maintaining and servicing the basic flow meter to ensure optimal performance.
Operating Unit
1. Proper Use and Technical Data
Covers correct application and essential specifications for the operating unit.
1.2 Explosion Hazard Area Use
Details safety requirements and precautions for using the unit in explosive atmospheres.
1.2.1 Electrical Data
Provides detailed electrical specifications and intrinsic safety data for the unit.
2. Installation and Mounting
Instructions for installing and mounting the operating unit in various configurations.
3. Operation Modes
Explains the different operational modes including manual, automatic, and SLOW mode.
3.3 Calibration
Overview of the calibration process to ensure accurate measurements.
3.4 Special Functions
Covers additional functionalities of the operating unit, such as unit changes.
4. Maintenance and Servicing
Guidance on performing maintenance and servicing on the operating unit, including battery replacement.
Relay Module RM1/RM3 and Mains Unit NG1
1. Proper Use
Describes the intended use of relay modules and mains units for automatic mode operation.
1.2 Explosion Hazard Area Use
Details the suitability and precautions for using these modules in explosion-risk zones.
2. Installation
Instructions for installing the relay modules and mains units.
3.1 Changing the Fuse
Steps for replacing fuses in the relay module or mains unit, including safety warnings.
Relay Module Ex-RM1m
1. Proper Use
Explains the intended use of the Ex-RM1m relay module, particularly for hazardous areas.
1.1 Technical Data
Lists technical specifications for the Ex-RM1m relay module.
2. Installation
Provides instructions for installing the Ex-RM1m relay module.
2.3 Electrical Connection
Details the electrical connection procedures for the Ex-RM1m, emphasizing safety.
G. Traceability / H. Annex
1. Terminal Assignment of Cables and Connectors
Diagrams and descriptions for connecting cables and connectors within the system.
Troubleshooting
General Faults
Addresses common faults and their solutions applicable across different operating modes.
Manual Mode Faults
Troubleshooting specific issues encountered in manual operation mode.
Automatic Mode Faults
Solutions for problems occurring during automatic operation mode.
Control Unit/Relay Module Installation Faults
Troubleshooting issues related to control unit or relay module installation.
Need help?
Do you have a question about the SL and is the answer not in the manual?
Questions and answers