Related Manuals for Case IH 93 Series
Summarization of Contents
Important Safety Information
Hydraulic Safety
Essential safety precautions for handling the hydraulic system during installation and operation.
Electrical Safety
Critical safety guidelines for electrical connections and power management.
Introduction
Updates
Information on obtaining the latest software and manual revisions for the system.
Preparing for Installation
Steps and conditions required to prepare the machine before SmarTrax installation.
Recommendations
Best practices recommended by Raven Industries for SmarTrax installation and operation.
Point of Reference
Clarifies the assumed orientation for following instructions in the manual.
Kit Contents
Comprehensive list of all components included in the SmarTrax installation kits.
Hydraulic System Installation
Install Fittings in the SmarTrax Valve
Procedures for correctly installing fittings onto the SmarTrax hydraulic valve.
Mount the SmarTrax Valve
Detailed steps for physically mounting the SmarTrax hydraulic valve onto the machine.
Install the Left and Right Steering Hoses
Instructions for connecting the specific hydraulic hoses for steering control.
Install the Pressure Hose
Steps for correctly connecting the hydraulic pressure supply hose.
Install the Tank Hose
Procedures for connecting the hydraulic tank return hose.
Install the Load Sense Hoses
Steps for connecting the hydraulic load sense hoses to the system.
Hydraulic Diagram
Visual representation of the hydraulic system connections before and after SmarTrax installation.
Cab Component Installation
Install the SmarTrax Node
Comprehensive guide for installing the SmarTrax control node, including mounting.
Node Mounting Locations
Guidelines and considerations for selecting the optimal mounting position for the SmarTrax node.
Install the Foot Switch
Instructions for installing the SmarTrax system engagement foot switch in the cab.
Install the Valve Harness
Steps for connecting the main valve harness to the SmarTrax system components.
Install the Chassis Cable - SmarTrax-Only Systems (If Applicable)
Procedure for installing the chassis power cable for SmarTrax-only configurations.
Connect SmarTrax to an Existing Chassis Cable (If Applicable)
Instructions for integrating SmarTrax with the machine's existing chassis CAN system.
Startup Procedures
Verify the SmarTrax System Installation
Procedures to confirm all installation steps are completed correctly before system operation.
Calibrate the SmarTrax System
Steps for calibrating the SmarTrax system for optimal steering performance.
Need help?
Do you have a question about the 93 Series and is the answer not in the manual?
Questions and answers