Advertisement
Quick Links
Advertisement
Related Manuals for Triplett 8075
Summarization of Contents
Descriptions of Device Components
Front Faceplate and Keypad
Describes the front faceplate and keypad layout of the tester with numbered components for identification.
Top, Bottom, and Back Side Ports
Details the ports and features located on the top, bottom, and back sides of the tester for connectivity and operation.
Function Overview
ONVIF IP Camera Test
Explains the step-by-step process for testing IP cameras using ONVIF, covering connections, discovery, and video display.
RS485 PTZ Control
Details controlling camera Pan, Tilt, and Zoom functions using the RS485 interface and supported protocols.
High Definition Analog Camera Test
Describes testing analog cameras with HD video output formats like AHD, CVI, and TVI, including PTZ control.
POE and DC Output
Explains how the tester provides PoE power to IP cameras and 12VDC to analog cameras.
Audio Test
Explains how to test audio signal functionality input through the tester's audio input jack.
WIFI & RF Tools
Covers RF spectrum testing, WIFI testing, and signal monitoring across 2.4G and 5G bands for interference detection.
Network Test
Outlines Ethernet network testing functions like Network Sniff, Subnet List, and Ping Test.
TDR & RJ45 Cable Test
Details checking RJ45 cable pair conditions (normal, open, short) and performing cable length measurements using TDR.
Basic Operation
Battery Installation and Charging
Provides instructions on how to safely install and charge the tester's rechargeable lithium-ion polymer battery.
Battery FAQs
Addresses common questions regarding the tester's lithium-ion polymer battery, including charging and memory effects.
Lanyard and Power Management
Guides on attaching the lanyard for handling and details device power ON/OFF procedures and LED worklight function.
IP Camera Testing
Step 1: Power and Network Connection Test
Covers testing Ethernet connections, IP settings, DHCP status, and network port information for IP cameras.
Connecting to Network or Camera
Explains various methods for connecting the tester to network devices and cameras, including power options.
Connecting to POE Switch and Camera
Details connecting to POE switches for charging and powering POE cameras, adhering to standards.
LAN and WIFI IP Mode Configuration
Describes setting up IP addresses for the tester in LAN and WIFI using DHCP or static IP configuration.
DHCP Service and WIFI Hotspot
Explains using the tester to provide DHCP service and setting it up as a WIFI hotspot.
WIFI Connection and Bridging
Outlines connecting to a wireless network and bridging LAN and WIFI networks.
Step 2: Discovering the Device
Covers discovering and listing cameras, displaying snapshots, and handling authentication requirements.
ONVIF Authentication and Account Management
Details authenticating cameras using ONVIF credentials and managing saved account information.
Manually Adding a Camera
Explains how to manually add cameras by inputting their IP address and ONVIF service path.
Step 3: Video and PTZ Control
Covers displaying real-time camera video, controlling PTZ rotation, and setting camera parameters.
Analog Camera Testing
Connecting to Analog Camera
Guides on connecting analog cameras via BNC connector and powering them using the tester's 12V output.
Analog Camera Test Interface
Explains the interface for analog camera testing, including coaxial HD decoder support and PTZ settings.
Network Tools
IP Setting Configuration
Details how to configure the tester's IP address using DHCP or manual settings within the network tools.
Connecting to WIFI
Explains the process for connecting the tester to a wireless network, selecting an SSID, and entering credentials.
PING Test
Describes how to perform a Ping test to check network connectivity, latency, and packet loss.
Network Sniffing
Explains the sniff function to monitor network traffic, detect MAC and IP addresses of broadcast packets.
List Subnet
Covers scanning all devices within a subnet, measuring network speed, and displaying results in a list format.
Wireless Test
Antenna Structure
Describes the design and handling of the tester's external foldable dual antennas for wireless operations.
Spectrum Test
Details scanning and detecting spatial spectrum signals and WIFI hotspots across 2.4G and 5G bands.
WIFI Test and Signal Monitoring
Explains displaying WIFI hotspots, listing SSIDs, viewing parameters, and monitoring signal strength.
Cable TDR Test
TDR Test Interface and Measurement
Introduces the Cable TDR test interface and explains measurement results like attenuation and skew.
Record Playback
Managing Recorded Files
Explains how to snapshot and record videos, and manage files by deleting, renaming, and creating directories.
RS485 Data Monitor
Analyzing RS485 Bus Data
Details receiving and displaying data on the RS485 bus to analyze PTZ controller protocols, with connection methods.
Signal Generator
Video Signal Generation
Describes using the signal generator to produce video test signals for various formats like CVI, TVI, AHD, and HDMI.
System Settings
Shutdown, Tone, and Language
Configures automatic shutdown time, keyboard prompt tone, and screen display language.
Brightness, Time, and System Upgrade
Adjusts backlight brightness, system time/date, and performs online software upgrades.
USB Storage Function
Explains how to enable and use the USB storage function for data sharing, with precautions for disconnection.
Powering Devices
Using POE to Power Devices
Explains how to use the tester's Network port 1 to supply POE power to compatible devices, noting power limits and standards.
Specifications
IPC and WIFI Test Specifications
Lists specifications for IPC and WIFI testing, including protocols, Ethernet, spectrum, and signal monitoring.
Analog Video and PTZ Specifications
Outlines specifications for analog video testing, PTZ control, and signal generation.
System Parameters and Environment
Lists system parameters like display, operation method, and working environment specifications.
About Triplett
Company Background and Warranty
Provides background information on Triplett, its acquisition, facilities, and the product's limited warranty terms.
Need help?
Do you have a question about the 8075 and is the answer not in the manual?
Questions and answers