Related Manuals for Triplett CamView5
Summary of Contents for Triplett CamView5
- Page 1 8150 CamView5 IP 1080P HD CCTV Tester www.triplett.com/8150 850 Perimeter Road • Manchester, NH (603) 669-6400 • info@triplett.com...
- Page 2 Thank you for purchasing the IP camera tester. Please read the manual before using the IP camera tester. Please first read the「Safety Information」carefully in the manual. The manual should be kept with unit in case reference is needed. Keep the S/N label for after-sale service within warranty period. Product without S/N label will be charged for repair service.
-
Page 3: Table Of Contents
CCTV TESTER User Manual 1. Safety information ....................1 2. IP Camera Tester Introduction ................1 2.1 General......................1 2.2 Packing list....................1 2.3 Function interface ..................2 3. Operation......................3 3.1 Installing the Battery..................3 4. IP camera test .......................3 4.1 Power output ....................3 4.2 IPC Test pro ....................4 4.3 IP discovery....................4 4.4 Rapid ONVIF test ..................5 4.5 Non-Onvif IP camera test................8... -
Page 4: Safety Information
CCTV TESTER User Manual 1. Safety information ◆ The tester is intended for use in compliance with the local rules for electrical testers. ◆ To prevent the functional failure, the product should not come in contact with water. ◆ The exposed part of the tester should not be exposed to any liquids. ◆... -
Page 5: Function Interface
CCTV TESTER User Manual 2.3 Function interface Menu key Confirm key Return: Return or cancel while setting paramet ers of the menu 4x zoom the image display LED light The RS485 data transmission and received indicator lights red while the data is being transmitted or received. -
Page 6: Operation
CCTV TESTER User Manual Press more than 2 seconds to turn on or off, short press to turn on or off the menu display Micro SD card removeable, supports up to 32G DC12V 3A power output, temporarily supply power to the camera PoE power supply output/LAN test interface HDMI output Video image /AHD/TVI/CVI signal input（BNC interface）... -
Page 7: Ipc Test Pro
CCTV TESTER User Manual 4.2 IPC Test pro Camera test often needs to open multiple apps, "IPC TEST PRO" app, usin g new technology and combing multiple functions into one APP, can increase efficiency. Application: Support multi-segment IP address scan, can visually display camera brand, click IP address to display the image. Can supply the power to PoE camera. -
Page 8: Rapid Onvif Test
CCTV TESTER User Manual Local IP: Tester’s IP address, Tester can auto-modify the tester’s IP to the same network segment with the scanned camera's IP. Discovery IP: Connected tester equipment’s IP address. If the camera is connected to the tester directly, the tester will display the camera’s IP address, if the tester connects to Local Area Network, it displays the current IP address. - Page 9 CCTV TESTER User Manual Confirm: Save the modified parameters. Click “MENU” icon to open camera setting. While in the “Live video” menu, click “Video Menu” at the top right of the image to access the following tools: Snapshot, Record, Photo, Playback, Lens simulation, PTZ and Settings.
- Page 10 CCTV TESTER User Manual After selecting a channel, you can edit the channel name, modify the display position, and switch the font size. Select “Content location - Default location”. Select “Customize” to arbitrarily adjust the channel name and display location. Click “OK”...
-
Page 11: Non-Onvif Ip Camera Test
CCTV TESTER User Manual Doc: Click "Create document”, to create a test report document for the camera, . Click “Preview” to view the report document Enter the camera test information, click "Create Document" to complete the report. Click doc menu again, you can preview the report document. Icons description: The description of function icons on the bottom toolbar. -
Page 12: Analog Camera Test
CCTV TESTER User Manual IP camera type: Click on the IP Camera type to select the manufacturer and model number of the connected IP camera. Manual: Click IP camera type, list Honeywell, Kodak, Tiandy, Aipu-waton, ACTi, WoshiDA IP camera etc. If the brand has official original protocols, pls select camera type, input IP camera address, username and password, click “official”... -
Page 13: Cvi Camera Test
CCTV TESTER User Manual 5.3 CVI camera test When HD CVI signal input, the tester will display the image resolution at the top of the screen. Double tap on the screen to display the image in full screen. The tester supports resolution up to 3840 x 2160P 12.5/15 FPS. （1）PTZ control 1.1 Coaxial PTZ control Click the icon “PTZ”... -
Page 14: Tvi Camera Test
CCTV TESTER User Manual （2）Coaxial camera menu setting Input calling dome camera menu address code, you can press the key “Enter” or click the icon to call the dome camera menu. set the parameters by 5.4 TVI camera test When using an HD TVI signal input, the tester will display the image resolution at the top of the screen. Double tap on the screen to display the image in full screen. -
Page 15: Ahd Camera Test
CCTV TESTER User Manual Input calling dome camera menu address code, after finishing the parameter settings, you can press the key “Enter” or click the icon call the dome camera menu. 5.5 AHD camera test When using an AHD signal input, the tester will display the image resolution at the top of the screen. Double tap on the screen to display the image in full screen. -
Page 16: Network Tool
CCTV TESTER User Manual 6.1 Network tool (1) IP address scan Connect the cable to the LAN port, click icon to enter, set your IP address search range by changing the Start and End IP addresses. Click the “Start” button to scan the IP address range. You can also input an IP address in the Port Number Scan to scan for o pen ports. (2) PING Test Application: PING testing is the most conventional network debugging tool. -
Page 17: Rj45 Cable Tdr Test
CCTV TESTER User Manual (6) Trace route It is used to determine the path of the IP packet access target. Note: Trace route testing results only for reference, for accurate test route tracking, use a professional Ethernet tester. (7) Link monitor This app is used to see if an IP address is occupied by other network devices. -
Page 18: Poe Power / Dc12V 3A Power Output
CCTV TESTER User Manual Test LAN cable or telephone cable. Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires as well as the serial number of the cable tes ter kit will be displayed. The number of the cable tester is 255. -
Page 19: Update
CCTV TESTER User Manual 1. Do not input power into the “DC12/3A OUTPUT” port. 2. Do not output the DC12V/3A power into the DC12V/IN port of the IP camera tester. 3. The IPC tester power output is close to 3A, if the IP camera’s power is over 3A, the tester will auto enter protection mode. Disconnect all tester connections and then connect the tester with the power adaptor to continue. -
Page 20: System Setting
CCTV TESTER User Manual You can choose internal or external SD card. For other operation details, refer to FTP settings. 6.7 System Setting Language: Select your desired language: English, Chinese, Korean, Russian, Italian, Polish, Spanish, French or Japanese. Typewriting: You can select typewriting or install other typ ewriting: Date/Time: Set the Date/time of the IP tester. - Page 21 CCTV TESTER User Manual Brightness: Set the desired brightness of the IP tester and adjust the sleep time settings. Volume: Set volume level SD Card: Displays SD Card Capacity. You can also format the SD card or unmount it before removing it. FTP server: Once the IP tester connects to a network, a computer can be used to read the SD card files via FTP.
-
Page 22: Hdmi Out (*Optional)
Connect an HDMI cable from the IP tester to an HDTV monitor at any time. It supports up to 3840x2160P 30FPS resolution. 7. Specifications 7.1 General Specifications Model 8150 Camview5 Security Camera Tester Display New 5-inch IPS touch screen cctv tester, 1920*1080 resolution Network port... - Page 23 CCTV TESTER User Manual 1280x720p 25/30/50/60fps, UTC control and call OSD men 1 channel AHD input （ BNC interface） , resolution support 8MP AHD camera test, AHD video signal 3840 x 2160P 15 FPS, 2592x1944p12.5/20fps, test 2560x1440p 18/25/30fps, 2048x1536p 18/25/30fps, 1920x1080p 25/30fps, 1280x720p 25/30/50/60fps, UTC control and call OSD menu Analog video test...
- Page 24 CCTV TESTER User Manual Temperature Working 30%-90% Humidity Dimension/Weight 183mm x 110mm x 36.5mm /0.32kg...
Need help?
Do you have a question about the CamView5 and is the answer not in the manual?
Questions and answers