Selecting A Brightness Of The Display (Only For Cd-5090R) - Sherwood CD-5090 Operating Instructions Manual

Checking the edited tracks
In the edit mode, check as you do the programmed tracks. (refer to "Checking the programmed tracks" on
page 15)
Clearing all edited tracks
In the edit mode, press the STOP/CLEAR button for more than 4 seconds or open the tray.
In the manual edit mode only, you can clear or rectify the edited tracks like "Rectifying any
wrong programmed tracks" or "Clearing the programmed tracks" on page 15.

SELECTING A BRIGHTNESS OF THE DISPLAY (ONLY FOR CD-5090R)

PROG/REV PROG/REV
or
or or
Each time this button is pressed, the brightness
of the display changes as follows ;
In the display OFF mode, pressing any button
will restore the display ON mode.
18
ON DIM OFF