Table of Contents
Advertisement
Quick Links
Introduction
UNPACKING AND INSTALLATION
Congratulations on Your Purchase!
Your new high fidelity Compact Disc Player is designed to
deliver maximum enjoyment and years of trouble free service.
Please take a few moments to read this manual thoroughly. It will
explain the features and operation of your unit and help ensure a
trouble free installation.
Please unpack your unit carefully. We recommend that you save
the carton and packing material. They will be helpful if you ever
need to move your unit and may be required if you ever need to
return it for service. Your unit is designed to be placed in a
horizontal position and it is important to allow at least two inches
of space behind your unit for adequate ventilation and cabling
convenience.
To avoid damage, never place the unit near radiators, in front of
heating vents, in direct sunlight, in excessively humid, dusty
locations or near sources of strong magnetic fields. Connect your
complementary components as illustrated in the following
section.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol is intended to alert the user to the
presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
LASER PRODUCT
CAUTION
Invisible laser radiation when the unit is open. Do not stare
into beam.
CAUTION : USE OF ANY CONTROLS, ADJUSTMENTS, OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
FOR U.S.A.
FCC INFORMATION
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
CAUTION : Any changes or modifications in
construction of this device which are not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
2
CLASS1
Advertisement
Table of Contents
Related Manuals for Sherwood CLASS1
Summary of Contents for Sherwood CLASS1
-
Page 1: Introduction Unpacking And Installation
Congratulations on Your Purchase! Your new high fidelity Compact Disc Player is designed to deliver maximum enjoyment and years of trouble free service. CLASS1 Please take a few moments to read this manual thoroughly. It will LASER PRODUCT explain the features and operation of your unit and help ensure a trouble free installation. -
Page 2: Read This Before Operating Your Unit
READ THIS BEFORE OPERATING YOUR UNIT FOR U.S.A. AND CANADA ........120 V FOR OTHER COUNTRIES ......115 V/230 V FOR YOUR SAFETY FOR YOUR SAFETY Units shipped to the U.S.A. and Canada are designed Units shipped to countries other than the above for operation on 120 V AC only. -
Page 3: Table Of Contents
CONTENTS Introduction UNPACKING AND INSTALLATION ....................... 2 READ THIS BEFORE OPERATING YOUR UNIT.................. 3 Rear Panel Connections ..........................5 Front Panel & Remote Controls ........................6 Before Operation ............................10 Operations PLAYING CDs............................11 CHANGING DISCS DURING PLAY....................... 12 SKIP AND SEARCH PLAY........................12 PLAYING TRACKS IN RANDOM SEQUENCE (RANDOM PLAY) ........... -
Page 4: Rear Panel Connections
Connect these jacks to the CD(or AUX) input jacks of your amplifier or receiver. DIGI LINK JACKS Connect this jack to the DIGI LINK jack of Sherwood amplifier or receiver bearing the DIGI LINK III or II mark to control this unit remotely by DIGI LINK system. -
Page 5: Front Panel & Remote Controls
Front Panel & Remote Controls FRONT PANEL CONTROLS DISC SKIP OPEN/CLOSE MULTIPLE COMPACT DISC PLAYER CDC-5090R DISC SELECTOR POWER PHONES EDIT T.SIZE TIME RANDOM PROG AUTO RANDOM REPEAT ALL 1 DISCS A< >B INTRO DELETE EDIT SCENE TRACK INDEX STEP 10 11 12 PROGRAM/ DELETE/... - Page 6 POWER SWITCH DISC SKIP BUTTON Press this switch to turn the power on and press again For loading or unloading discs, press this button to to turn the power off. rotate clockwise to the next disc position. For system operation, plug the AC input cord into the switched AC outlet on amplifier or receiver, keep the DISC SELECTOR BUTTONS POWER switch ON and control power ON/OFF with...
- Page 7 • For available functions, refer to the operating instructions of the Sherwood compatible amplifier or receiver. • To listen to CDs by DIGI LINK system, first make DIGI LINK connection between this unit and the Sherwood compatible amplifier or receiver.
- Page 8 REMOTE CONTROL OPERATION RANGE (ONLY FOR CDC-5090R) DISC SKIP OPEN/CLOSE MULTIPLE COMPACT DISC PLAYER CDC-5090R DISC SELECTOR POWER PHONES EDIT T.SIZE TIME RANDOM PROG AUTO RANDOM REPEAT ALL 1 DISCS DELETE EDIT SCENE TRACK A< >B INTRO INDEX STEP 10 11 12 PROGRAM/ DELETE/ INTRO...
-
Page 9: Before Operation
Before Operation • Only compact discs bearing this mark can be reproduced. Notes • Do not expose discs to direct sunlight, high humidity or high temperature for a long time. • When loading or unloading a disc in the disc tray, always place it with the printed side up. -
Page 10: Operations
Operations PLAYING CDs Load the disc(s) and close the disc tray. Turn the power on. OPEN/CLOSE POWER " " indicator lights up when the number of tracks is more than 14. For loading discs on other trays each, press the DISC SKIP button. -
Page 11: Changing Discs During Play
CHANGING DISCS DURING PLAY Change the desired discs. Open the disc tray. OPEN/CLOSE Disc tray During playing the disc , the discs be changed. After changing the discs, press the OPEN/CLOSE button to close the disc tray. When changing the disc , press the “DISC SKIP”... -
Page 12: Playing Tracks In Random Sequence (Random Play)
PLAYING TRACKS IN RANDOM SEQUENCE (RANDOM PLAY) 1 disc random play All discs random play In the 1 disc random play mode, press “RANDOM” button again. The unit automatically selects a disc among five DISPLAY DISC discs and a track on that disc in random sequence RANDOM and plays it. -
Page 13: Repeat Play
REPEAT PLAY Repeating a single track during play Press this button after selecting the desired track. DISPLAY DISC Each time this button is pressed, the repeat mode changes as REPEAT SKIP follows: SEARCH REPEAT EDIT T.SIZE PROG/REV. DEL/REV. 1/ALL A<->B REPEAT TIME 1/ALL... -
Page 14: Playing Tracks In Any Sequence (Programmed Play)
PLAYING TRACKS IN ANY SEQUENCE (PROGRAMMED PLAY) Up to 32 selections can be programmed to play in any desired sequence. The track number greater than 99 can not be memorized. Select the desired disc. Programming the tracks on the CDs Example) When selecting the disc 1. - Page 15 Repeat the above steps 2, 3 and 4 until the desired program is completed. Start the programmed play. During the programmed play, when you want normal play without clearing your programmed selections, DISPLAY DISC select the desired disc with the DISC SELECTOR or SKIP DISC SKIP button or the desired track on the current SEARCH...
- Page 16 Select the track 7. DISPLAY DISC SKIP SKIP SEARCH EDIT T.SIZE PROG/REV. DEL/REV. REPEAT TIME 1/ALL A<->B RANDOM INTRO PROG TRACK REMOTE CONTROL UNIT RM-CDC80 Store the selected track in the memory. PROG TRACK PROG TRACK DISPLAY DISC PROGRAM/ REVIEW SKIP PROG/REV.
-
Page 17: Editing For Recording
TIME 1/ALL A<->B RANDOM INTRO activated for the automatic music search function on the Sherwood DIGI-LINK III cassette deck. REMOTE CONTROL UNIT RM-CDC80 AUTO EDIT 10 11 12 13 14 Select the desired tape length. - Page 18 PLAY button to start play from the first track of the side B for recording. REMOTE CONTROL UNIT RM-CDC80 When this unit is connected to Sherwood compatible cassette deck controlled remotely by DIGI-LINK III system, if using the CD synchro record function on PROG the cassette deck, recording a CD is easier.
-
Page 19: Selecting A Brightness Of The Display (Only For Cdc-5090R)
Checking the edited tracks In the edit mode, check as you do the programmed tracks. (refer to “Checking the programmed selections” on page 16) DISPLAY DISC PROGRAM/ REVIEW SKIP PROG/REV. SEARCH EDIT T.SIZE PROG/REV. DEL/REV. REPEAT TIME RANDOM INTRO 1/ALL A<->B REMOTE CONTROL UNIT RM-CDC80 Clearing all edited tracks... -
Page 20: Deleted Play
DELETED PLAY When there are the undesired discs or tracks, you can delete up to 32 selections. Select the desired disc. Deleting the undesired discs or tracks Example) When selecting the disc 1. In the stop mode, enter the delete mode. DISC DISPLAY DISC... -
Page 21: Display Disc
Checking the deleted selections Each time the DELETE/REVIEW button is pressed DISPLAY DISC in the delete mode (meaning “DELETE” lights up in DELETE/ REVIEW the stop mode), the deleted selections will appear in SKIP DEL/REV. SEARCH the deleted sequence. EDIT T.SIZE PROG/REV. -
Page 22: Selecting A Time Display
SELECTING A TIME DISPLAY Each time this button is pressed during play, time display changes as follows: Elapsed playing time TRACK INDEX of the current track. 10 11 12 13 14 DISPLAY DISC TIME SKIP SEARCH EDIT T.SIZE PROG/REV. DEL/REV. Remaining playing REPEAT TIME... -
Page 23: Troubleshooting Guide
Troubleshooting Guide If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. REMEDY PROBLEM POSSIBLE CAUSE Connect the cord securely. No power The AC input cord is disconnected. -
Page 24: Specifications
Specifications SYSTEM ..........................Compact Disc Digital Audio TYPICAL AUDIO PERFORMANCES Number of channels ................................2 Frequency response, 20~20,000 Hz ........................... 0.5 dB Signal to noise ratio, A Wtd............................110 dB Dynamic range ................................95 dB Total harmonic distortion, 1 kHz ..........................0.005 % Wow and flutter .......................... - Page 25 5707-04725-003-0...
- Page 26 OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG DISC SKIP OPEN/CLOSE MULTIPLE COMPACT DISC PLAYER CDC-5090R DISC SELECTOR POWER PHONES EDIT T.SIZE TIME RANDOM REVERT PROG AUTO RANDOM REPEAT ALL 1 DISCS PEAK DELETE EDIT SCENE TRACK A< >B INTRO INDEX STEP 10 11 12 PROGRAM/ DELETE INTRO...
Need help?
Do you have a question about the CLASS1 and is the answer not in the manual?
Questions and answers