Selecting A Time Display (Audio Cd Only) I; Adjusting The Brightness Of The Fluorescent Display I; Listening With Headphones - Sherwood CDC-5506 Operating Instructions Manual

2.
While displaying the track(/file) to be replaced
with new one, select track(/file) 10 and store it in
the memory.
or
PROG
1 2 3 4 5
• You can select a track(/file) with pressing the NUMERIC
buttons.
within 2 sec.
1
Example : For "10" :
• When selecting a track with the NUMERIC buttons, the
selected track is stored automatically without the
PROGRAM button.
• When the track/file to be replaced disappears, perform
the above step 1 again.
SELECTING A TIME DISPLAY
(Audio CD only)
• During play,
TIME
or
• Each time this button is pressed, the time display
changes as follows.
TRACK
→
1 2 3 4 5
Elapsed time of the current track
↓
TRACK
1 2 3 4 5
Remaining time of the current track
↓
1 2 3 4 5
Remaining time of the disc
• During random play, etc., the time display may show "
PROGRAM
TRACK
STEP
0
INDEX 7 8 9
10 11 12
INDEX STEP 7 8 9
10 11 12
7 8 9
10 11 12
--:--
".
16
ADJUSTING THE BRIGHTNESS OF THE
FLUORESCENT DISPLAY
DIMMER
• Each time this button is pressed, the brightness of the
fluorescent display changes as follows.
→ ON → dimmer → OFF
• In the display OFF mode, pressing any buttons
cancel the display OFF mode to display the operation
status.

LISTENING WITH HEADPHONES

• For private listening, insert the headphones into the
PHONES jack.
PHONES
■Note :
• Be careful not to set the volume too high when using
headphones.