Ƒu Listening To Music For A More Detailed Sound Quality; Ƒu Adjusting The Brightness Of The Fluorescent Display - Sherwood CD-772 Operating Instructions Manual

Continued
§ Checking the programmed tracks
ƒU In the program mode (meaning "PGM" is displayed in the stop mode), press the FORWARD/REVERSE
SEARCH( ) buttons.
§ Clearing the programmed tracks
ƒU In the program mode (meaning "PGM" is displayed in the stop mode), press the PROGRAM button.
LISTENING TO MUSIC FOR A MORE DETAILED SOUND QUALITY
ƒU The remastering processes the audio signal readed from the disc and converts its sampling frequency to
192 kHz for a more detailed sound quality.
ƒU Press the REMASTERING button.
ADJUSTING THE BRIGHTNESS OF THE FLUORESCENT DISPLAY
Each time these buttons are pressed, the pro-
grammed tracks are displayed in the programmed
order or in the opposite order.
Then "PGM" disappears and the programmed
tracks are all cleared.
ƒU Opening the disc tray clears all programmed
tracks.
ƒU Then " " is displayed.
ƒU To turn off the remastering function, press the
REMASTERING button again.
§ Note :
ƒU The remastering function have no effect on the
digital signals that are output from the OPTICAL
DIGITAL OUTPUT jack of this unit.
ƒU Each time the DIMMER button is pressed, the
brightness of the fluorescent display changes as
follows :
¡ ON ¡ dimmer ¡
ƒU In the display OFF mode, pressing any button will
cancel the display OFF mode for several seconds
to display the operation status.
16
OFF