Before Operation - Sherwood CD-5090 Operating Instructions Manual

Before Operation

Only compact discs bearing this mark can be
reproduced.
In handling a disc, hold it carefully with edges.
Do not stick paper or write anything on the
printed surface.
Fingermarks and dust on the recorded surface
should be carefully wiped off with a soft cloth.
Wipe straight from the inside to the outside of
the disc.
Always keep the discs in their cases after use
to protect them from dust and scratches.
Notes
Do not expose discs to direct sunlight, high
humidity or high temperature for a long time.
When loading or unloading a disc in the disc
tray, always place it with the printed side up.
Printed side
The DTS logo on the front means that the CD
encoded with the DTS signal can be heard in
DTS mode when this digital out is connected
to the digital input of the amplifier with the
DTS decoder, etc..
"DTS" and "DTS Digital Surround" are
trademarks of Digital Theater Systems, Inc.
10