Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
E3
PROFESSIONAL REMOTE ALARM SYSTEM
INSTALLATION MANUAL
This unit is designed for professional installation only and must be installed by an
Encore authorized dealer. Please register this product at
www.encoreautomotivesystems.com.
E3 IN REV. A
1
Advertisement
Table of Contents
Related Manuals for Encore E3
Summary of Contents for Encore E3
- Page 1 PROFESSIONAL REMOTE ALARM SYSTEM INSTALLATION MANUAL This unit is designed for professional installation only and must be installed by an Encore authorized dealer. Please register this product at www.encoreautomotivesystems.com. E3 IN REV. A...
- Page 2 Install the wiring neatly under carpets or behind trim to prevent possible damage to wires. FOR AUTHORIZED DEALER TECHNICAL SUPPORT, PLEASE CALL Toll Free: (855) GO-ENCORE : 8:00 am TO 5:00 pm PST. WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of.
- Page 3 INSTALLATION DIAGRAM E3 IN REV. A...
- Page 4 CAUTION: Do not connect the wire harness to the control module until all wiring to vehicle is complete. 2 PIN WHITE CONNECTOR (THE LED STATUS INDICATOR): The led indicator status should be mounted in a highly visible area such as top of the dashboard, on top E3 IN REV. A...
- Page 5 Mount the valet switch in a hidden but accessible location. Route the valet switch wires to the control module. 8 - Pin Accessory Connector GRAY WIRE / CHANNEL 3 NEGATIVE TRUNK OUTPUT E3 IN REV. A...
- Page 6 Upon disarming, the interior lights will remain on for 30 seconds. b). If the alarm is triggered, the interior light will flash for the same duration as the siren. E3 IN REV. A...
- Page 7 "0 volt". Move the alligator clip to +12V and the voltmeter will receive "12 volts". Cut this wire and make connections. Be sure to program Blue Wire door lock timer to 3.5 seconds. (See Alarn Feature B – 3 Programming.) E3 IN REV. A...
- Page 8 Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit. FEATURES PROGRAMMING: ALARM FEATURE “A” PROGRAMMING: 1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position. E3 IN REV. A...
- Page 9 You are now in the Alarm feature “B” programming mode. Press and release the transmitter button corresponding to the feature you want to program. E3 IN REV. A...
- Page 10 1. Turn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position. 2. Push the Valet switch 5 times holding in on the 5th push. a long chirp will be heard. Release the valet switch. You are now in the Alarm feature ‘Shock Sensor’ programming mode. E3 IN REV. A...
- Page 11 Encore Automotive Systems LLC. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your Encore equipment is guaranteed for “life” to the original purchaser/user of the equipment and the original vehicle in which it was installed by an authorized installer under the following conditions: If the product proves defective (according to Encore’s testing) within the first year, the defective unit may be exchanged or repaired free of charge.
- Page 12 Any equipment or parts which are claimed to be defective under this WARRANTY must be sent to the Encore Service center with “proof of purchase” at the purchaser’s expense prior to such return, a Return Authorization Number needs to be obtained. Encore will return the equipment, charges prepaid.
- Page 13 Notes : E3 IN REV. A...
Need help?
Do you have a question about the E3 and is the answer not in the manual?
Questions and answers