If there is a mistake or missing file on the pen drive, it will show: File not found
or Disk Error on the bottom line. Please check USB disk or file and plug in
again.
After reading the firmware
is displayed. Click this button on begin the
upgrade.
When DVR is updating the firmware, it shows "Firmware is updating, please
wait".
After firmware update is completed, Firmware update is success, System
will restart ----" is displayed, and then the system restarts.
44
ENXDVR-4C
4 Channel Surveillance DVR with 4 Cameras
USER'S MANUAL
www.encore-usa.com