Related Manuals for GRAUPNER 33579
Summarization of Contents
Intended Use and Target Group
Package Content
Lists the items included in the product package.
Declaration of Conformity
States the product's compliance with EU norms.
Symbols and Safety Notes
General Safety Instructions
Provides general safety instructions for product operation and handling.
Installation and Connections
Receiver Binding Process
Steps to link the receiver with a transmitter for communication.
Interfaces and Power Supply
Details on receiver sockets, connections, and power requirements.
Receiver Setup Menu
Alarm Settings (Voltage and Temperature)
Configuring low voltage and high temperature warnings for the receiver.
Maximum Altitude Alarm
Setting a maximum altitude alarm for the multicopter.
Transmitter Settings for Functions
Cycle Time, Sum Signal, and Telemetry
Settings for cycle time, SUMD signal, and telemetry sensor connection.
Flight Mode Configuration
Configuring flight modes (Attitude/Rate) via transmitter channel 5.
Gyro Initialization and Basic Settings
Initialization Procedure
Steps to initialize the gyro by keeping the model still during power-up.
Basic Multicopter Configuration
Selecting multicopter type and mode for basic operation.
Flight Modes and Throttle Curves
Acro 3D Mode Throttle Curves
Details on throttle travel and curves for Acro 3D flight mode.
Normal Mode Throttle Curves
Details on throttle course and curves for normal flight mode.
Throttle Settings and Motor Protection
Suggested Throttle Course
Recommendations for setting throttle course in attitude mode with limits.
Motor Start Safety Function
Explanation of the safety function preventing unintended motor starts.
Advanced Mixer and Calibration Settings
Optional Mixers and Oneshot Protocol
Configuring optional mixers and the Oneshot communication protocol.
Minpower, Logging, and Calibration
Settings for minimum power, data logging, and gyro calibration.
Axis Assignment
Gyro Axis Assignment Steps
Steps to assign Roll, Nick, and Yaw axes for gyro operation.
Roll and Nick Gyro Tuning
Roll/Nick P and D Adjustment
Tuning the Proportional (P) and Derivative (D) components for Roll/Nick.
Damping and Agility Settings
Adjusting damping factor and agility for optimal gyro performance.
Multicopter Yaw Settings
Yaw P and I Factor Tuning
Adjusting Proportional (P) and Integral (I) factors for yaw control.
Yaw D Factor Configuration
Setting the Derivative (D) factor for yaw stopping behavior.
Firmware Update Procedure
Software Loader and COM Port Setup
Instructions for setting up the software loader and selecting the correct COM port.
Environmental Protection and Disposal
Disposal Guidelines
Guidelines for disposing of the product and its components responsibly.
Care, Maintenance, and Warranty
Product Care and Maintenance
Basic care instructions and maintenance recommendations for the product.
Warranty Information
Information regarding the product's warranty period and terms.
Need help?
Do you have a question about the 33579 and is the answer not in the manual?
Questions and answers