Related Manuals for Cascade 55E
Summarization of Contents
Recommended Hydraulic Supply Options
Sideshifting Hose Reel Groups
Details RH and LH THINLINE™ 2-port hose reel groups and mast double internal hose reeving.
Solenoid Adaption Hose Reel Groups
Describes 6-N-1 cable/hose reel and cable reel/single internal hose reeving groups.
Truck Requirements
Truck Relief Setting
Specifies recommended and maximum hydraulic relief settings for the truck.
Truck Flow Volume
Details minimum, recommended, and maximum hydraulic flow volumes for the truck.
Carriage Mount Dimension (A) ITA (ISO)
Provides minimum and maximum carriage mount dimensions per ITA (ISO) standards.
Auxiliary Valve Functions
Lists auxiliary valve functions and their compliance with ITA (ISO) standards.
Installation Procedure
Attach Overhead Hoist
Instructions for attaching the overhead hoist to the attachment.
Unlock Quick-Change Lower Mounting Hooks
Procedure for unlocking quick-change lower mounting hooks on the attachment.
Mount Attachment on Truck Carriage
Details on securely mounting the attachment onto the truck carriage.
Install and Engage Lower Hooks
Guide on how to install and engage the lower hooks of the attachment.
Prepare Hydraulic Hoses
Instructions for preparing hydraulic hoses, including length and fittings.
Solenoid Valve and Hose Reel Connections
Details connections for solenoid valves and various hose reel configurations.
Install Solenoid Control Knob
Steps for installing the solenoid control knob on equipped units.
Install Wiring for Solenoid Units
Wiring instructions for solenoid-equipped units.
Flush Hydraulic Supply Hoses
Procedure for flushing hydraulic supply hoses before connection.
Connect Hoses to Attachment Fittings
Connecting prepared hydraulic hoses to the attachment fittings.
Check Attachment Functions
Steps to verify all attachment functions operate correctly after installation.
Sideshift Operations
Explains sideshift operations and their controls, including solenoid valve use.
Adjust Relief Cartridge
Guidance on adjusting the hydraulic relief cartridge for fork positioning.
Periodic Maintenance
100-Hour Maintenance
Maintenance tasks to be performed every 100 hours of operation.
500-Hour Maintenance
Maintenance tasks to be performed every 500 hours of operation.
1000-Hour Maintenance
Maintenance tasks to be performed every 1000 hours of operation.
Need help?
Do you have a question about the 55E and is the answer not in the manual?
Questions and answers