Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Amazone UG 2200 Special
Summarization of Contents
User Information
Purpose of the document
Explains the purpose and content of the operating manual.
Locations in the operating manual
Explains how directions are presented in the manual.
Diagrams
Explains how diagrams and item numbers are used.
General Safety Instructions
Obligations and Liability
Outlines operator and user obligations and manufacturer liability.
Representation of Safety Symbols
Explains the meaning of safety symbols and signal words.
Organisational Measures
Details required personal protective equipment and manual accessibility.
Safety and Protection Equipment
Emphasizes checking safety equipment before operation.
Informal Safety Measures
Advises compliance with general safety regulations.
User Training
Specifies requirements for trained personnel operating the machine.
Safety Measures in Normal Operation
Instructions for safe operation and daily checks.
Danger from Residual Energy
Warns about residual energy risks and where to find details.
Maintenance and Repair Work, Fault Elimination
Guidelines for maintenance, repair, and securing media.
Design Changes
Prohibits unauthorized changes and specifies approval requirements.
Spare and Wear Parts and Aids
Advises using genuine parts and warns about non-approved parts.
Cleaning and Disposal
Instructions for careful handling and disposal of materials.
User Workstation
Specifies that only one person can operate the machine from the tractor seat.
Warning Symbols and Other Signs on the Machine
Explains the structure and meaning of warning symbols and labels.
Positions of Warning Symbols and Other Labels
Shows diagrams illustrating the placement of warning symbols on the machine.
Specific Warning Symbol Explanations
Details specific warning symbols (MD 078, MD 082, MD 084) and their meanings.
Loading and Unloading
Loading and Unloading with a Tractor
Instructions for loading/unloading using a tractor and the pneumatic braking system.
Loading Using a Lifting Crane
Safety instructions for loading the machine with a lifting crane using specified attachment points.
Product Description
Overview of the Assemblies
Provides a diagram and list of the machine's main components and controls.
Safety and Protection Equipment
Describes transport locking mechanisms and handrails for safety.
Supply Hoses Between the Tractor and the Machine
Details the hydraulic, electric, and brake lines connecting the tractor and machine.
Transportation Equipment
Lists and illustrates required lights, reflectors, and signs for transportation.
Intended Use
Defines the intended use of the field sprayer and restrictions for use on slopes.
Regular Device Inspections
Outlines requirements for regular inspections by a certified workshop.
Consequences of Using Certain Crop Protection Agents
Warns about potential damage to machine parts from specific crop protection agents.
Danger Areas and Danger Points
Identifies hazardous areas and points on the machine where people can be caught.
Rating Plate and CE Mark
Explains the information found on the EU and machine rating plates and CE marking.
Conformity
States compliance with relevant directives and standards.
Technically Possible Maximum Application Rate
Details the limiting factors for the implement's maximum application rate.
Maximum Permissible Application Rate
Explains how to determine the permissible application rate based on agitator capacity.
Technical Data
Provides specifications for the basic implement, including tank volume and pressure.
Basic Implement
Lists the core specifications of the implement, such as weight, dimensions, and capacities.
Payload
Explains how to calculate payload and provides tyre load capacity data.
Noise Emissions Data
States the measured acoustic pressure level during operation.
Required Tractor Equipment
Lists the necessary specifications for the tractor to operate the machine.
Structure and Function
Functionality
Provides diagrams illustrating the functional flow of the UG Special and UG Super sprayer systems.
Control Terminal
Details the different connections and switch taps on the control terminal for various functions.
PTO Shaft
Explains the function and safety precautions for the PTO shaft.
Coupling the PTO Shaft
Step-by-step instructions for safely coupling the PTO shaft to the tractor.
Uncoupling the PTO Shaft
Step-by-step instructions for safely uncoupling the PTO shaft from the tractor.
Hydraulic Connections
Describes hydraulic connections, coloured markings, and tractor control unit activation types.
Coupling Hydraulic Hose Lines
Instructions for correctly connecting hydraulic hose lines, noting compatibility and pressure.
Disconnecting Hydraulic Hose Lines
Procedures for safely disconnecting hydraulic hose lines and storing them.
Air Pressure Brake System
Explains the dual-circuit air brake system requirements and brake pressure regulator settings.
Coupling the Brake System
Step-by-step guide for coupling the dual-circuit pneumatic braking system.
Uncoupling the Brake System
Procedures for safely uncoupling the dual-circuit pneumatic braking system.
Hydraulic Service Brake System
Explains how to couple and uncouple the hydraulic service brake system.
Coupling the Hydraulic Service Brake System
Instructions for coupling hydraulic couplings, emphasizing cleanliness.
Uncoupling the Hydraulic Service Brake System
Procedure for uncoupling hydraulic service brake system connections.
Emergency Brake
Describes the function of the emergency brake system in case of release from the tractor.
Parking Brake
Explains the operation and adjustment of the parking brake.
Foldable Wheel Chocks
Instructions on how to use the foldable wheel chocks for securing the machine.
Safety Chain for Implements Without Brake System
Details the requirement and proper fixing of a safety chain for implements without a brake system.
Drawbars
Discusses drawbar types and safety during transportation.
Track Follow Drawbar SelfTrail
Explains the function and connection of the track follow drawbar for precise tracking.
Universal Drawbar UniTrail
Describes the universal drawbar for precise tracking and its use in different positions.
Straight and Hitch Drawbars
Explains the use of straight and hitch drawbars with or without AutoTrail control.
Lower Link Safety Chain
Explains the purpose of the lower link safety chain to prevent unintentional raising.
AutoTrail Tracking Control
Describes the AutoTrail system for precise tracking and its realignment function.
Connecting the AutoTrail Position Encoder
Step-by-step guide for connecting the AutoTrail position encoder and its calibration.
Safety Functions for Preventing Machine Tipping Over
Details safety functions related to boom height, transport position, and operational speed.
AutoTrail Steering Drawbar
Explains the operation and transport of the AutoTrail steering drawbar.
Tracking Control via Tractor Control Unit
Describes manual steering of the drawbar using the tractor control unit for precise tracking.
Stand
Instructions for raising and lowering the machine's stand.
Spray Liquid Tank
Explains how the spray liquid tank is filled and its components.
Fill Level Indicator on the Machine
Describes the function of the fill level indicator.
Agitator
Details the operation and adjustment of the agitators for homogenizing spray liquid.
Maintenance Platform with Ladder
Information about the maintenance platform and its ladder, including safety warnings.
Suction Port for Filling the Spray Liquid Tank (Optional)
Instructions for filling the tank via the suction port, emphasizing relevant instructions.
Filling Connection for Filling the Spray Liquid Tank with Pressure (Option)
Describes the pressure filling connection and its operation.
Flushing Water Tank
Explains the purpose of the flushing water tank and how to fill it with fresh water.
Induction Bowl with Canister Flushing
Details the induction bowl, its components, and the canister flushing process.
Spray Gun for Flushing the Induction Bowl
Describes the use of the spray gun for flushing the induction bowl.
Spray Agent Addition Ecofill (Option)
Explains the Ecofill connection for extracting spraying agent from Ecofill tanks.
Fresh Water Tank
Describes the fresh water tank capacity and its drain tap, emphasizing the use of clean water.
Pump Equipment
Lists specifications for different pump equipment models (250 l/min and 370 l/min).
Filter Equipment
Explains the importance of using and cleaning all provided filters for optimal operation.
Filling Sieve
Describes the filling sieve and its mesh size, preventing contamination during filling.
Suction Filter
Details the suction filter, its mesh size, and its role in filtering spray liquid and water.
Self Cleaning Pressure Filter
Explains the function of the self-cleaning pressure filter and its mesh count.
Nozzle Filters
Describes the nozzle filters and their mesh sizes for preventing nozzle blockage.
Bottom Sieve in the Induction Bowl
Explains the function of the bottom sieve in the induction bowl.
Immobiliser for Towing Device
Describes the lockable device that prevents unauthorized use of the machine.
Transport and Secure Container (Optional)
Mentions the transport and secure container for storing accessories.
Camera System
Details the features of the optional camera system for manoeuvring assistance.
Exterior Wash Down Kit (Optional)
Describes the components of the exterior wash down kit for cleaning the sprayer.
Work Lights
Mentions work floodlights on the boom and platform, and LED nozzle illumination.
Operating Terminal
Explains that sprayers with AMATRON 3 or AMASPRAY+ have quantity regulation controlled via the terminal.
Control Terminal
Lists functions performed via the control terminal, including data input and sprayer control.
AMASPRAY+
Describes AMASPRAY+ as a fully automatic control device for area-based regulation.
Comfort Equipment (Optional)
Outlines functions of optional comfort equipment, including remote-controlled cleaning and filling stop.
Construction and Function of the Sprayer Boom
Profi-folding
Describes functions of Profi-folding, including boom folding, height, and tilt adjustments.
Folding via the Tractor Control Unit
Explains how boom folding and height adjustment are controlled via tractor control units.
Folding Out and In
Safety precautions and steps for folding the sprayer boom out and in.
Super-L1-Gestänge
Details the Super-L1 boom, its components, and transport locking mechanisms.
Locking and Unlocking the Transport Locking Mechanism
Instructions for unlocking and locking the transport mechanism of the sprayer boom.
Super-S Boom
Illustrates the Super-S boom and lists its components and features.
Unlocking and Locking the Transport Safety Catch
Procedures for unlocking and locking the transport safety catch on the sprayer boom.
Part Width Section Valve TG
Describes the part width section valve TG, including its components and function.
Outer Boom Locking
Explains the outer boom locking mechanism that protects the boom from damage.
Spacer
Describes the function of the spacer to prevent boom collisions with the ground.
Swing Compensation
Explains the swing compensation, its unlocking, and locking for even lateral distribution.
Folding via the Tractor Control Unit
Details the process of folding out the sprayer boom using tractor control units.
Adjust Spraying Height
Safety instructions and steps for adjusting the sprayer boom's spraying height.
Folding Out the Sprayer Boom
Step-by-step guide to folding out the sprayer boom using tractor control units.
Folding In the Sprayer Boom
Step-by-step guide to folding in the sprayer boom and locking it in transport position.
Working with the Sprayer Boom Folded Out on One Side
Conditions and safety precautions for operating the boom folded out on one side.
Reduction Joint on the Outer Boom (Optional)
Explains how the reduction joint is used to manually fold the outer boom element to reduce working width.
Boom Width Reduction (Option)
Describes the boom width reduction option and how to use it with part width sections.
Boom Extension (Option)
Explains the boom extension option that increases working width.
Hydraulic Tilt Adjustment (Optional)
Describes how to align the sprayer boom parallel to the ground using hydraulic tilt adjustment.
DistanceControl (Optional)
Details the DistanceControl system for automatically holding the boom at a desired distance from the target.
Spray Lines and Nozzles
Discusses different spray lines and nozzles and provides a formula for calculating residue spraying distance.
Technical Data
Provides technical data related to spray lines and residue spraying.
Nozzles
Describes nozzle bodies, diaphragms, filters, and shutters.
Multiple Nozzles
Explains the advantage of using multiple nozzle heads and reducing working width.
Triple Nozzles (Optional)
Describes the triple nozzle configuration.
Quadruple Nozzles (Optional)
Describes the quadruple nozzle body and its 25 cm nozzle spacing.
Edge Nozzles
Explains boundary, electric end, and electric additional nozzle switching.
Line Filter for Spray Lines (Optional)
Describes the function and types of line filters for spray lines.
Special Optional Equipment for Liquid Fertiliser
Discusses types of liquid fertiliser and application rules.
Three-Ray Nozzles (Optional)
Explains the benefits of three-ray nozzles for liquid fertiliser application and their operational areas.
7 Hole Nozzles / FD Nozzles (Optional)
Describes 7-hole and FD nozzles, their conditions, and availability.
Drag Hose Equipment for Super-S Boom (Optional)
Details the drag hose unit with dosing discs for late top dressing.
Foam Marker (Optional)
Explains the foam marker system for precise bout guidance and its operating device.
Pressure Circulating System (DUS) (Optional)
Describes the pressure circulating system, its benefits, and principal components.
Overview – Pressure Circulating System (DUS)
Provides a schematic overview of the pressure circulating system (DUS).
Lifting Module (Option)
Explains the lifting module that allows additional raising of the sprayer boom and safety precautions.
Commissioning
Checking the Suitability of the Tractor
Instructions for checking tractor suitability, including weight and braking requirements.
Calculating Tractor Weight, Axle Loads, and Tyre Capacities
Explains how to calculate tractor weight, axle loads, and tyre capacities for safe operation.
Data Required for Calculation
Lists the data needed for tractor suitability calculations, with definitions.
Minimum Ballasting Calculation for Steering Capability
Formula for calculating minimum front ballast to ensure steering capability.
Actual Front Axle Load Calculation
Formula for calculating the actual front axle load.
Actual Total Weight Calculation
Formula for calculating the actual total weight of the tractor and machine combination.
Actual Rear Axle Load Calculation
Formula for calculating the actual rear axle load.
Tyre Load Capacity
Provides information on tyre load capacity and its relation to axle load.
Tractor Suitability Table
Table for comparing calculated values with permissible tractor specifications.
Requirements for Tractor Operation with Attached Machines
Ensures tractor connection fittings and loads are within approved limits to prevent breakage.
Combination Options of Coupling Devices
Table detailing permitted coupling device combinations for tractors and implements.
Compare Permissible DC Value with Actual DC Value
Instructions for comparing DC values to prevent coupling device failure.
Machines Without Their Own Brake System
Safety warnings and operational speed limits for machines without a brake system.
Adjusting the Length of the PTO Shaft to the Tractor
Crucial safety warnings and procedures for adjusting PTO shaft length to prevent crushing or drawing in.
Securing Tractor/Machine Against Accidental Starting and Rolling
Essential safety steps to prevent unintentional movement during maintenance or intervention.
Fitting Wheels (Specialist Workshop)
Instructions for assembling wheels, including torque specifications and safety warnings.
Initial Operation of Service Brake System
Recommends brake tests and coordination with specialist workshops for optimal braking.
Adjusting the Hydraulic System with the System Setting Screw
Explains how to adjust hydraulic systems using the system setting screw, emphasizing pressureless state.
AutoTrail Position Encoder
Details the installation of the AutoTrail position encoder holder and its placement for precise tracking.
Track Setting (Specialist Workshop)
Guide for adjusting the machine's track width to match the tractor's wheel tracks.
Adjusting Steering Geometry for Track Follow Drawbar
Instructions for adjusting steering geometry to ensure precise track follow-up.
Coupling and Uncoupling the Machine
Coupling the Machine
Safety warnings and instructions for coupling the machine to the tractor.
Uncoupling the Machine
Safety warnings and procedures for uncoupling the machine from the tractor.
Manoeuvring the Uncoupled Machine
Procedures for safely manoeuvring the uncoupled machine using a service brake system.
Transportation
Checks Before Moving Off
Lists checks required before moving off for transportation.
Securing Machine for Transport
Instructions to move and secure the sprayer boom and steering drawbar for transport.
Using the Machine
Warning Symbols and Labels
Refers to warning symbols and safety information for user guidance.
DistanceControl, ContourControl Risks
Warns of injury risk from accidental boom movement in automatic mode near ultrasound sensors.
Preparing for Spraying Operation
Outlines steps for preparing the sprayer, including PPE and equipment checks.
Preparing the Spray Liquid
Provides safety guidelines for handling crop protection agents and preparing spray liquid.
Calculating Filling and Re-fill Quantity
Explains calculations for determining spray liquid quantities needed for treatment.
Filling Table for Remaining Spray Area
Provides a table to calculate required re-fill quantities based on working width and distance.
Filling with Water
Instructions for filling the spray liquid tank with water, emphasizing safety and preventing contamination.
Filling the Spray Liquid Tank via the Filling Opening
Step-by-step guide for filling the tank through the main filling opening.
Filling the Spray Liquid Tank via the Suction Port
Instructions for filling the tank using the suction port on the control terminal.
Inducting Agents
General safety and procedure for inducting agents into the spray liquid tank.
Inducting Liquid Agents
Detailed steps for inducting liquid agents using the control terminal and pump.
Clean the Spray Agent Canister and Induction Bowl
Procedures for cleaning canisters and the induction bowl after use.
Ecofill
Instructions for using the Ecofill system for extracting spraying agent and rinsing.
Spraying Operation
Instructions for performing spraying operations, including calibration and nozzle selection.
Drift Reduction Measures
Provides measures to reduce spray drift, such as nozzle choice, speed, and weather conditions.
Residues
Describes types of residues and guidelines for their disposal and management.
Diluting the Residue in the Spray Liquid Tank
Instructions for diluting and spraying residual liquid from the tank onto untreated areas.
Draining the Spray Liquid Tank Using the Pump
Steps for draining the spray liquid tank using the pump and drainage hose.
Cleaning the Field Sprayer
General instructions for cleaning the field sprayer, emphasizing timely cleaning.
Cleaning the Sprayer with the Tank Empty
Procedure for cleaning the sprayer in a threefold reduction process.
Draining the Final Residues
Instructions for draining final residues either on the field or in a courtyard.
Cleaning the Suction Filter When Tank is Empty
Procedure for cleaning the suction filter when the tank is empty.
Cleaning the Suction Filter When Tank is Full
Procedure for cleaning the suction filter when the tank is full.
Cleaning the Pressure Filter When the Tank is Empty
Instructions for cleaning the pressure filter when the tank is empty.
Cleaning the Pressure Filter When the Tank is Full
Instructions for cleaning the pressure filter when the tank is full.
External Cleaning
Steps for performing external cleaning of the field sprayer and boom.
Cleaning the Sprayer During a Critical Agent Change
Procedure for cleaning the sprayer when changing crop protection agents.
Cleaning the Sprayer with a Full Tank (Work Interruption)
Instructions for cleaning the sprayer when work is interrupted due to bad weather.
Faults
No Suction from the Pump
Troubleshooting steps for lack of suction from the pump, including blockages and air leaks.
Pump Does Not Have Any Power
Troubleshooting for pump power issues, including dirty filters and jammed valves.
Spray Cone Vibrates
Troubleshooting for irregular pump delivery flow that causes spray cone vibration.
Oil/Spray Liquid Mixture in Oil Filler Neck
Troubleshooting for pump diaphragm defects causing oil/liquid mixture.
Required Spray Rate Not Achieved
Troubleshooting for not achieving the required spray rate due to speed or pump issues.
Deviation from Permissible Spray Pressure Range
Troubleshooting for spray pressure deviations caused by operational speed.
Cleaning, Maintenance and Repair
Before Each Start-up Checks
Checks for hoses, pipes, connections, and worn parts before initial start-up.
Regular and Proper Maintenance
Emphasizes the importance of regular maintenance for longevity and warranty conditions.
Use of Genuine AMAZONE Parts
Advises using only genuine AMAZONE spare parts and replacement hoses.
Specialist Knowledge Requirement
Highlights that testing and maintenance operations require specialist knowledge.
Environmental Protection Measures
Instructions to observe environmental protection measures during cleaning and maintenance.
Prohibited Actions
Lists prohibited actions like drilling the running gear or welding load-bearing components.
Protective Measures During Specific Work
Advises necessary protective measures during welding, drilling, grinding, and cut-off wheel work.
Cleaning Before Repair Work
Instructions to clean the sprayer thoroughly with water before repair work.
Cleaning the Pump Pressure Connection
Instructions to disconnect machine cable and power supply before maintenance.
Cleaning
General cleaning instructions, paying attention to brake, air, and hydraulic lines.
Cleaning with a Pressure Washer / Steam Jet
Safety guidelines for using pressure washers or steam jets for cleaning, avoiding electrical components.
Winter Storage and Long Periods Out of Operation
Comprehensive steps for preparing the sprayer for winter storage, including cleaning and draining.
Lubrication Instructions
Guidelines for lubricating grease nipples and the machine at specified intervals.
Lubricants
Lists recommended lithium saponified, multipurpose greases with EP additives.
Lubrication Point Overview
Provides a table detailing lubrication points, intervals, and types of lubrication.
Axle
Information regarding the axle and brake shaft bearing, including caution about grease.
Renewing the Wheel Hub Bearing Grease
Step-by-step instructions for renewing wheel hub bearing grease, including cleaning and adjustment.
Service Plan – Overview
Provides a maintenance schedule for different components after first use, daily, and weekly intervals.
Axle and Brake
Recommendations for brake performance, balancing, and general visual inspection of the brake system.
Checking the Brake Drum for Dirt (Workshop Work)
Instructions for checking the brake drum for dirt and inspecting brake pads.
Checking Wheel Hub Bearing Clearance (Workshop Work)
Procedure for checking and adjusting wheel hub bearing play.
Brake Pad Check
Criteria for checking and changing brake pads based on thickness and wear edge.
Adjustment on Linkage Adjuster (Workshop Work)
Instructions for adjusting the linkage adjuster and brake lever length.
Air Reservoir
Instruction to drain the air reservoir daily.
Line Filter
Instructions for cleaning or replacing defective filter inserts.
Inspection Instructions for Dual-line Service Brake System
Detailed inspection steps for the dual-line service brake system, including leak tightness and pressure.
Parking Brake
Instructions for adjusting the parking brake cable tension on new machines.
Hydraulic Brakes
Checks for hydraulic brake system components and instructions for venting the system.
Tyres / Wheels
General checks for tyres and wheels, including torque, seating, and pressure.
Tyre Pressures
Instructions for inflating tyres to nominal pressure and checking pressure differences.
Fitting Tyres (Workshop Work)
Guidance on fitting tyres, including rim seating surface checks and valve usage.
Check the Coupling Device
Checks for damage, wear, and tight fit of fastening bolts on coupling devices.
Towing Device
Instructions to check bolts for tight fit and observe specified tightening torques.
Hydraulic System
Safety warnings and procedures for working on the hydraulic system, including hose line checks.
Labelling Hydraulic Hose Lines
Explains valve chest identification providing manufacturer, date, and pressure information.
Maintenance Intervals
Specifies maintenance intervals after first use and before each start-up.
Inspection Criteria for Hydraulic Hose Lines
Criteria for replacing hydraulic hoses based on damage, brittleness, deformation, or lifespan.
Installation and Removal of Hydraulic Hose Lines
Guidelines for installing and removing hydraulic hose lines, ensuring cleanliness and proper routing.
Fluid Filter
Describes the oil filter for Profi-folding and how to check/replace it.
Cleaning the Solenoid Valves
Instructions for cleaning solenoid valves, potentially requiring flushing.
Clean / Exchange the Filter in the Hydraulic Plug
Procedure for cleaning or exchanging the filter in hydraulic plugs when functions slow down.
Hydro-pneumatic Pressure Reservoir
Warning about injury risk when working on the hydraulic system with a pressure reservoir.
Adjusting the Hydraulic Throttle Valve
Explains how to adjust hydraulic throttle valves to correct operating speeds for functions.
Calibrate the Flow Meter
Directs user to the ISOBUS manual for calibrating the flow meter.
Eliminating Limescale in the System
Instructions for eliminating limescale using acidification agents and safety precautions.
Field Sprayer Calibration
Guidelines for field sprayer calibration, including checking settings and nozzle output.
Determining Nozzle Type, Size, Spray Pressure, and Output
Step-by{title}by-step guide to determining nozzle type, size, pressure, and output using spray tables.
N Nozzles
Instructions for fitting and removing nozzles, including checking the nozzle shutter.
Hose Filters
Instructions for cleaning line filters and replacing defective filter inserts.
Instructions on Testing the Field Sprayer
Information on authorized centers for spray tests and legal requirements for testing frequency.
Electric Lighting System
Instructions for replacing light bulbs in the electric lighting system.
Screw Tightening Torques
Provides tables with screw tightening torques for various bolt sizes and classes.
Disposing of the Field Sprayer
Instructions for cleaning the sprayer before disposal and component eligibility for energy recovery.
Liquid Circuit
UG Special
Diagram illustrating the liquid circuit for the UG Special model.
UG Super
Diagram illustrating the liquid circuit for the UG Super model.
Spray Table
Flat-Fan, Anti-Drift, Injector and Airmix Nozzles
Provides permissible pressure ranges for different nozzle types and sizes.
Selecting the Nozzle Type
Guide for selecting nozzle type based on operational speed, spray rate, and atomisation characteristic.
Determining Nozzle Type, Size, Spray Pressure and Individual Nozzle Output
Step-by-step guide to determining nozzle type, size, pressure, and output using spray tables.
Spraying Nozzles for Liquid Manure
Lists nozzle types for liquid manure and provides spray tables for three-ray nozzles.
Spray Table for Three-Ray Nozzles
Spray rate data for three-ray nozzles (yellow and red) at various pressures and speeds.
Spray Table for 7-Hole Nozzles
Spray rate data for 7-hole nozzles (blue and red) at various pressures and speeds.
Spray Table for FD Nozzles
Spray rate data for FD nozzles (04, 05, 06) at various pressures and speeds.
Spray Table for Drag Hose Unit
Spray rate data for drag hose units with dosing discs at various pressures and speeds.
Conversion Table for Spraying Ammonium Nitrate / Urea Solution (AUS)
Table for converting spray rates for AUS and NP solutions based on density.
Need help?
Do you have a question about the UG 2200 Special and is the answer not in the manual?
Questions and answers