Related Manuals for Yamaha SWR2310-10G
Summarization of Contents
FCC INFORMATION (U.S.A.)
COMPLIANCE INFORMATION STATEMENT
Supplier's declaration of conformity procedure.
PRECAUTIONS
Power supply/power cord
Safety guidelines for the power cord and supply.
Location and connection
Guidelines for placing and connecting the product.
Maintenance
Procedures for product upkeep and cleaning.
Handling caution
Precautions to avoid injury during handling.
Backup battery
Information regarding the backup battery replacement.
NOTICE
Handling and maintenance
Important notices regarding product care and operation.
Saving data
How the unit maintains time information for data logging.
Warning: Fiber Optic Port Safety
Safety warning for fiber optic port usage.
Introduction
Included items
List of accessories included with the product.
Features
Key functionalities and capabilities of the product.
Separately sold items
List of optional accessories available for purchase.
Related software and documents
Information on associated software and documentation.
Controls and Connectors
Front Panel
Details of components and indicators on the front of the unit.
Bottom panel
Description of the bottom panel features.
Leg attachment guides
Locations for attaching the unit's legs.
Rack mount accessory attachment holes
Holes for attaching rack mount hardware.
Wall mount accessory attachment holes
Holes for attaching wall mount accessories.
Rear panel
Description of the rear panel features.
Side panel
Description of the side panel features.
Top panel
Description of the top panel features.
Port indicators
Explanation of status indicators for LAN and SFP/SFP+ ports.
Attaching the legs
Installation in a rack
Procedures for mounting the unit in a rack.
Installing SWR2310-10G in a 19-inch rack
How to install the SWR2310-10G in a 19-inch rack.
Installing SWR2310-28GT/18GT in a 19-inch rack
How to install SWR2310-28GT/18GT in a 19-inch rack.
Settings
Make settings using the Web GUI
How to configure the unit via its web interface.
Making settings from the command line using the CONSOLE port
Configuring the unit via serial console commands.
Connections
Connecting to a network device or a computer
How to connect the unit to other network components.
Installing an SFP module
Steps for installing SFP modules into the unit's ports.
Installing a direct attach cable
Procedure for installing direct attach cables.
Making stack connections
How to connect multiple units in a stack configuration.
Turning the power on
Steps for powering up the unit and checking indicators.
Initialization
Using the Web GUI to restore the factory settings
Restoring the unit to its default factory configuration via the Web GUI.
Using the cold start command to restore the factory settings
Restoring factory settings using command-line interface.
Entering the [I] (uppercase I) key during startup to restore the factory settings
Restoring factory settings by pressing a key during boot.
Appendix
Hardware specifications
Technical details and specifications of the product.
Dimensional diagram
Visual representation of product dimensions.
RJ-45/DB-9 console cable pin configuration
Pinout details for console connection cables.
Software license agreement
Terms and conditions for using the product's software.
Need help?
Do you have a question about the SWR2310-10G and is the answer not in the manual?
Questions and answers