Yamaha SWR2310-10G Owner's Manual page 22

Installation in a rack
2.
Install the rack mount panel to the 19-inch rack.
Using the screws that are included with the 19-inch rack (EIA standard 4 pcs., JIS standard
2 pcs.), fasten this unit to the 19-inch rack. Be sure to tighten the screws so that they will not
get loosened.
[For an EIA standard rack]
Screws supplied
with the 19-inch
rack
[For a JIS standard rack]
Screws supplied
with the 19-inch
rack
You can also mount two SWR2310-10G units as shown in the figure below.
Caution
So as not to obstruct the cooling vents on the top panel of this unit, leave a gap when installing
it in a 19-inch rack.
22
SWR2310-28GT SWR2310-18GT SWR2310-10G
SWR2310-10G
9
10
SWR2310-10G
9
1 0
9
10
19-inch rack
Rack mount panel