Page 1
L2 SWITCH SWR2310-28GT SWR2310-18GT SWR2310-10G Owner’s Manual Bedienungsanleitung Mode d’emploi Manual de instrucciones Manual de instruções Manuale di istruzioni Руководство пользователя 使用说明书...
Page 2
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT normalement ou est tombé. EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. AVERTISSEMENT POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 3
FCC requirements. against harmful interference when the Modifications not expressly approved by equipment is operated in a commercial Yamaha may void your authority, granted environment. This equipment generates, by the FCC, to use the product. uses and can radiate radio frequency 2.
• Be sure to connect to an appropriate on the product. outlet with a protective grounding Then have the product inspected or connection. Improper grounding can repaired by qualified Yamaha service result in electrical shock, fire, or damage. personnel. PA11-1/4 SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 5
• Before moving the product, remove all connected cables. Location and connection • Always consult qualified Yamaha service personnel if the product installation • Do not place the product in an unstable requires construction work, and make position or a location with excessive sure to observe the following precautions.
Page 6
• Do not rest your weight on the product or place heavy objects on it. Yamaha cannot be held responsible for • Do not look into the optical emitter when a damage caused by improper use or...
Touch an exposed metal part of on security best practices. the host device or other grounded object beforehand. • Do not install the product in a location where magnetic fields are strong. Otherwise, it might cause the product to malfunction. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 8
Conventions in this document Company names and product names in this document are abbreviated as follows. • Yamaha SWR2310-28GT, SWR2310-18GT, or SWR2310-10G L2 switch: this product • 10BASE-T/100BASE-TX/1000BASE-T cable: LAN cable • SFP-SWRT-SR or SFP-SWRT-LR: SFP+ module • SFP-SWRG-SX or SFP-SWRG-LX: SFP module •...
SWR2310-28GT is equipped with stack functionality. • This product can ease your daily network maintenance and operation responsibilities. You can use Yamaha LAN Monitor (application) to ascertain the network structure that is connected to this product and to monitor and manage the devices.
This is a PC application used to monitor this unit’s information and the entire network including all Dante devices on the Dante network, and the user guide for this application. • Yamaha network device USB serial driver / Yamaha network device USB serial driver installation guide This is a Windows driver that allows communication when the mini-USB CONSOLE port is connected via a USB cable to a computer, and the installation guide for this driver.
When an abnormal temperature is detected inside this product, the POWER indicator is lit orange. Reconsider the environment in which this unit is installed, and correctly install this unit so that its internal temperature is appropriate. You can also check this from Yamaha LAN Monitor or the Web GUI. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 13
SFP+ ports These ports support T10GBASE-SR, 10GBASE-LR, 1000BASE-SX, and 1000BASE-LX. Install an SFP+ module or SFP module sold separately by Yamaha. For the SWR2310- 28GT or SWR2310-18GT, install a direct attach cable (DAC-SWRT-3M or DAC-SWRT-1M). For details on installing an SFP+ or SFP module, refer to “Installing an SFP module”...
Controls and Connectors Bottom panel / rear panel / side panel / top panel Bottom panel SWR2310-28GT SWR2310-18GT SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 15
Use these holes to attach the WK-SWR wall mount accessory. SWR2310-18GT For details on installation, refer to “Installation on a wall or ceiling” SWR2310-10G (page 24). Notice Magnet sheets are not supported, and should not be used. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 16
The included power cord clamp (C-shaped) can be attached here. For details on installation, refer to “Turning the power on” (page 33) in “Connections.” Power supply inlet (three-pin connector, C14 type) Insert the included power supply cord here. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 17
Controls and Connectors Side panel SWR2310-28GT SWR2310-18GT SWR2310-10G Top panel SWR2310-28GT MAC address Serial number SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 18
This lists the model name, serial number, and MAC address etc. of this unit. Cooling vents The holes in this product are cooling vents for intake of external air. Warning Do not block the cooling vents or place objects near them. Doing so could cause fire or malfunctions. SWR2310-28GT SWR2310-18GT SWR2310-10G...
The link is lost. Unlit Unlit Not connected. (unavailable) A link is established. Connected by Lit (green) (available) 1000BASE-SX/LX or 10GBASE-SR/LR. Lit (green) If using the DAC-SWRT- Flashing (green) Data is flowing. 3M or DAC-SWRT-1M, connected at 10 Gbps. SWR2310-28GT SWR2310-18GT SWR2310-10G...
If you move the unit while it is still installed in the rack, vibration or physical shock might deform or damage the rack mount accessory or rack mount hardware, causing injury. There is also a possibility that this unit might malfunction. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 21
If the unit falls, injury or damage might occur. This could also cause electric shock or malfunctions. Use a Phillips screwdriver to firmly fasten the screws. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 22
You can also mount two SWR2310-10G units as shown in the figure below. SWR2310-10G Caution So as not to obstruct the cooling vents on the top panel of this unit, leave a gap when installing it in a 19-inch rack. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 23
SWR2310-18GT Installing in a 19-inch rack The SWR2310-28GT and SWR2310-18GT fit in a 19-inch rack mount 1U size. When installing them in a 19-inch rack, attach the included rack mount hardware (2 pcs.) using the included screws (8 pcs.). Here we explain using the SWR2310-28GT as an example.
SWR2310-18GT/SWR2310-10G. To distinguish the surfaces, refer to the illustrations for step 1 and step 3. • The position of the unit relative to the mounting accessory differs by 90 degrees between the SWR2310-18GT and the SWR2310-10G. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 25
You must use screws that are appropriate for the material of the wall or ceiling. If the unit falls, injury or damage might occur. Align the unit with the mounting accessory (illustration below). Notice If the supplied feet have already been attached to the unit, remove them. SWR2310-18GT SWR2310-10G SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 26
Install two commercially available screws in the fastening screw holes (two locations) of the mounting accessory. Warning You must use screws that are appropriate for the material of the wall or ceiling. If the unit falls, injury or damage might occur. SWR2310-28GT SWR2310-18GT SWR2310-10G...
Make settings using the Web GUI Here we explain the procedure for logging in to this unit using the Web GUI. You will use Yamaha LAN Monitor to log in to the Web GUI, so install Yamaha LAN Monitor before you continue.
• In order to use the mini-USB CONSOLE port, the USB serial driver must first be installed in the computer. • For details on installing the USB serial driver, refer to the “Yamaha Network Device USB Serial Driver Installation Guide.”...
Page 29
Take care when making connections. • If you use the mini-USB CONSOLE port, do not use a USB hub. If multiple Yamaha switches are connected to one computer, the COM port numbers assigned to the con- nection might be inadvertently exchanged.
Do not look into the optical emitter when the SFP module is installed. The SFP modules separately sold by Yamaha are class 1 laser devices. They may emit laser beams invisible to the eye. If the laser beam enters your eye, your eyesight might be damaged.
Page 31
Do not look into the optical emitter when the SFP module is installed. The SFP modules separately sold by Yamaha are class 1 laser devices. They may emit laser beams invisible to the eye. If the laser beam enters your eye, your eyesight might be damaged.
Page 32
Installing a direct attach cable A direct attach cable (DAC-SWRT-3M, DAC-SWRT-1M) can be installed in an SFP+ port of the SWR2310-28GT or SWR2310-18GT. Remove the protective cap from the SFP+ module section of the direct attach cable, and remove the dust cover from the SFP+ port of this unit.
Page 33
Making stack connections Attach a direct attach cable or an SFP+ module (SFP-SWRT-SR or SFP-SWRT-LR) to an SFP+ port of the SWR2310-28GT. If using an SFP+ module, you must additionally provide a fiber optic cable that is suitable for the SFP+ module.
Using the Web GUI to restore the factory settings This unit can be restored to its factory-set state by making settings from the Web GUI. Log in to the Web GUI from Yamaha LAN Monitor. Choose “Administration” tab – “Maintenance” – “Restart or Initialize.”...
Page 35
[Shift] key so that you will be ready to enter an uppercase “I” immediately. When a screen asks you whether to execute initialization, press the <y> key to execute initialization. Initialize or not ?(y/n) Initialization is executed. Ready to Initialize ....SWR2310-28GT SWR2310-18GT SWR2310-10G...
Connector RJ-45 Polarity Automatic detection of straight/cross, or fixed at straight IEEE802.3z (1000BASE-SX/ 1000BASE-LX), Standard – IEEE802.3ae (10GBASE-SR/ 10GBASE-LR) SFP+ ports Number of – ports IEEE802.3z Standard – (1000BASE-SX/ 1000BASE-LX) SFP ports Number of – ports SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 37
(3-prong), power cord clamp, legs Included items 19-inch rack mount hardware and screws – The explanations in this document use the current specifications as of the date of publication. The latest version can be downloaded from the Yamaha website. http://www.yamaha.com/proaudio/ SWR2310-28GT SWR2310-18GT SWR2310-10G...
You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. (top_en_01) SWR2310-28GT SWR2310-18GT SWR2310-10G...
SOFTWARE and you also shall not have any third party to do so. 1-3. You shall not modify, remove or delete a copyright notice of YAMAHA contained in the SOFTWARE. 1-4. Except as expressly provided herein, no license or right, express or implied, is hereby conveyed or granted by YAMAHA to you for any intellectual property of YAMAHA.
Page 41
You agree that this AGREEMENT is the complete and exclusive statement of agreement between you and YAMAHA concerning the subject matter hereof and supersedes all proposals or prior agreements, verbal or written, and any other communications between you and the parties relating to the subject matter hereof.
Web GUI ........... 27 WK-SWR........... 24 LAN ports ..........13 Leg ............20 Leg attachment guides......15 Yamaha LAN Monitor......11, 27 Yamaha network device USB serial driver ......... 11, 28 microSD indicator........13 microSD slot..........13 mini-USB CONSOLE port ....13, 28 Password ..........
Page 46
Informations sur la mise au rebut dans d’autres pays en dehors de l’Union européenne : Ce symbole est seulement valable dans l’Union européenne. Si vous souhaitez vous débarrasser de déchets d’équipements élec- triques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée. (weee_eu_fr_02) SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 47
Informazioni sullo smaltimento negli altri Paesi al di fuori dell’Unione europea: Questi simboli sono validi solamente nell’Unione Europea; se si desidera scartare questi articoli, si prega di contattare le autorità locali o il rivenditore e richiedere informazioni sulla corretta modalità di smaltimento. (weee_eu_it_02) SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 48
Tel: +356-2133-2093 JAFZA-16, Office 512, P.O.Box 17328, Jebel Ali FZE, Dubai, UAE Tel: +971-4-801-1500 PA53 Head Office/Manufacturer: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, Japan (For European Countries) Importer: Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany SWR2310-28GT SWR2310-18GT SWR2310-10G...
Page 49
Продукция Коммутатор Второго Уровня SWR2310-28GT Коммутатор Второго Уровня SWR2310-18GT Коммутатор Второго Уровня SWR2310-10G Кита ́ й Страна происхождения Изготовитель YAMAHA CORPORATION 10-1 Nakazawa-cho, Naka-ku, Hamamatsu-shi, Shizuoka-ken 430-8650, Япония. Номинальное напряжение 100-240 В перем. тока, 50/60 Гц Потребляемая мощность SWR2310-28GT: 25,2 Вт...
Need help?
Do you have a question about the SWR2310-28GT and is the answer not in the manual?
Questions and answers