Related Manuals for Parker LINKnet AC30V
Summarization of Contents
Safety Information
Intended Users and Application Area
Defines users and the equipment's application in industrial motor control.
Personnel Qualifications and Requirements
Emphasizes qualified personnel for installation/maintenance and user familiarity with MMI/software.
Chapter 1 - Overview
Product Features and Ethernet Protocols
Details LINKnet features, supported Ethernet protocols (Modbus, Ethernet IP).
Software, Hardware, and Communication Requirements
Specifies software versions, supported hardware, and communication differences.
Ethernet Recommendations and Web Access
Provides recommendations for Ethernet setup and notes no webpage support.
Chapter 2 - Installation
Wiring and Ethernet Connection Setup
Covers cable specifications, RJ45 port usage, and connection methods.
Drive Firmware Update Procedures
Outlines methods to update drive firmware via DSE or SD card.
Graphical Keypad and DSE Connectivity
Explains GKP display elements and steps to connect the drive to DSE.
Chapter 3 - Initial Set-up
IP Addressing and Node Address Configuration
Details unique IP addressing, default shipping, self-assignment, and node address setting.
Computer IP Address for LINKnet Access
Steps to configure the PC's IP settings for Ethernet communication with LINKnet.
Chapter 4 - Using DSE and AC30 Programming
LINKnet Module Addressing and Templates
Explains node addressing and selecting AC30 macro templates in DSE.
Parameter Management and Favorites
Covers saving parameters, managing favorites, and understanding parameter color definitions.
Troubleshooting Communication Issues
Addresses duplicate node/IP addresses and active Ethernet connections.
AC30 Function Blocks and Phase Blocks
Details additional function blocks for AC30 drives and specific AC30P/D phase blocks.
Chapter 5 - Connecting to the Drive
DSE Module List and Information Retrieval
How DSE displays connected modules, IP addresses, and uses Command/Get Info.
Chapter 7 - AB EtherNet/IP Server Example
Allen Bradley ControlLogix Integration
Steps to configure ControlLogix for EtherNet/IP communication with AC30.
Ethernet Interface and Module Setup in AB
Configuring Ethernet interface and generic modules within Allen Bradley software.
Chapter 8 – Ethernet Network Topology & EDS file
Ethernet Topology Recommendations
Advises on Star topology, discourages Daisy Chain for LINKnet.
Electronic Data Sheet (EDS) Availability
Information on obtaining the Electronic Data Sheet (.eds) file for LINKnet.
Chapter 9 – Programming TS8000
TS8000 Modbus Settings and Configuration
Details required Modbus settings and configuration for TS8000.
TS8000 to AC30V Communication Setup
Step-by-step guide for establishing communication between TS8000 and AC30V.
Fieldbus Connector and Data Type Mapping
Configuring fieldbus connectors and mapping data types for Modbus.
Ethernet Data Types and Conversion
Explanation of Ethernet data types and their conversion for Modbus.
Chapter 10 - Using Remote I/O
Reading and Writing Digital Remote I/O
Using Read/Write Logics blocks for digital I/O communication with LINKnet.
Reading Analog Remote I/O
Utilizing Value Reader blocks for accessing analog input data from remote I/O.
Setting up Internal Watchdog on Wago I/O Coupler
Wago Watchdog Configuration Steps
Procedure to access and enable the internal watchdog on the Wago I/O coupler.
Modbus Watchdog Settings and Timeout
Configuring Modbus watchdog type, timeout values, and trigger masks.
LinkNet Monitoring of Wago I/O Communication
Programming LinkNet to detect Wago I/O communication loss via watchdog.
Chapter 11 - Troubleshooting
Duplicate Node/IP Address Resolution
Identifying and resolving issues related to duplicate node and IP addresses.
Active Ethernet Connection Indicator
How to visually confirm an active Ethernet connection on the GKP.
Chapter 12 - Technical Specifications & Performance
LINKnet Performance Metrics and Speed
Details on Nodes available, message processing speed, and Ethernet buss speed.
Chapter 13 - Recommended Auxiliary Products
Recommended Remote I/O and Ethernet Switches
Lists recommended Wago Remote IO products and unmanaged Ethernet switches.
Other Communication Network Options
Mentions Anybus X-Gateway Modbus TCP Master Gateway.
Appendix A – AC30 Firmware Release Notes
Firmware Version LN 1.7 Updates and Fixes
Notes on release 1.7.1, including Phase Locking, Ethernet, Sequence Logic, and crash fixes.
Firmware Version LN 1.6 Updates and Fixes
Covers releases 1.6.1, 1.6.2, and 1.6.3, including DSE support, parameter fixes, and initial releases.
Need help?
Do you have a question about the LINKnet AC30V and is the answer not in the manual?
Questions and answers