Surface Controls - Maytag MER5552BA - 30" Electric Range Use And Care Manual

Surface Controls
Use to turn on the surface elements. An hlfinite choice of
heat settings is avaHabHe from Lew to High. The knobs can
be set on or between any of the settings.
Setting the Controls
1. Place pan on surface element.
2. Push in and turn the knob in either direction to the desired
heat setting.
° The control panel is marked to identify which _ C_
element the knob controls. For example, the
at right indicates left front element. 0 0
graphic
3. There is an element indicator light on the control panel.
When any surface control knob is turned on, the light will
turn on. The light will turn off when all the surface ele-
ments are turned off.
4. After cooking, turn knob to OFF. Remove pan.
Suggested Heat Settings
The size, type of cookware and cooking operation will affect the
heat setting. For information on cookware and other factors
affecting heat settings, refer to "Cooking Made Simple" booklet.
Low (2): Use to keep
foods warm and melt
chocolate and butter.
High (10): Use to bring
liquid to a boil. Always
reduce setting to a lower
heat when liquids begin to
boil or foods begin to cook.
Med. Low (3-a):
Use to continue
cooking covered
foods or steam
foods.
[
OFF
High
10
• •
Medium ...............
_ledium (5°7): Use to
maintain slow boil for
large amounts of liquids
and for most frying
operations.
(Style varies by model]
_led. High (8=g): Use
to brown meat, heat oil
for deep fat frying or
sauteing. Maintain fast
boil for large amounts
of liquids.
BEFORE COOKING AFTER COOKING
- Always place a pan on the surface unit before you turn it o Make sure surface unit is turned off,
on, To prevent damage to rail .3e.never operate surface - Clean up messy spills as soon as possible,
unit without a pan in place.
- NEVER use the cooktop as a storage area for rood or
cookware
DURING COOKING
- Be sure you know which knob controls which surface
unit. Make sure you turned on the correc_ surface unit.
• Begin cooking on a higher heat setting then reduce to a
lower setting to complete the operation. Never use a
high heat setting for extended cooking,
o NEVER allow a pan to boil dry. This could damage the
pan and the appliance
o NEVER Louch cooktop until it has cooled, Expec_some
parts of the cooktop, especially around the surface units.
tc. become warm or hot during cooking. Use potholders
OTHER TIPS
- If cabinet s'{orage is provided directly above cooking
surface, limit it to items that are infrequently used and
can be safely stored in an area subjected to heat.
Temperatures may be unsate for items such as volatile
liquids, cleaners or aerosol sprays,
• NEVER leave any items, especially plastic items, on the
cooktop. The hot air from the vent may ignite flammable
kems melt or soften plastics, or increase pressure in
closed containers causing them to burst
NEVER allow aluminum foil. meat probes or any other
metal object, other than a pan on a surface element, to
...............................
to pro_ect hands.
4