Maytag MER4351AAQ - 30" Electric Range Use And Care Manual page 7

@
Manual Clean Oven Control
(select models]
J
\
\\\
A
More+
\\
...... \
...... _iiiiiiiiii!iii/iiiliii/iii!iiiiiiiii_ .......... • •
iO _ Less-
Â:_º` { (_A_,L&L) .... /
B C D E F
NOTE: The dispiay will show 12:00 when the appliance is first connected to power OFif power is interrupted. The Bake and Broil
indicators light when function is pressed.
A
B
D
E
F
Bake
Broil
Timer
Clock
CANCEL
More+ or
Less-
Use for baking and roasting.
Use for broiling and top browning.
Sets Timer.
Use to set time-of-day clock.
Cancels all operations except Timer
and Clock.
Enters or changes time, oven
temperature. Sets Hi or LO broil.
Using the Teuchpads
Press the desired pad.
Press the More+ or Less- pad to enter time or temperature.
, A beep will sound each time a function pad is pressed. There
is no beep for the More+ or Less- pad.
, A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the More+ or Less-
pad, the time or temperature will automatically be entered.
If more than 30 seconds elapse between touching a
function pad and the More+ or Less- pad, the function will
be canceled and the display will return to the previous
display.
Settiog the CJock
1. Press the Clock pad.
° The clock time cannot be set if the control is pro-
grammed for a bake, broil or timing operation.
2. Set the correct time of day using the More+ or Less- pads.
If the More+ or Less- pad is not pressed within 30 sec-
onds, the program will cancel. Press the Clock pad and
begin again.
Settiog the Timer
The timer can be set from one minute 001] up to 99 hours
and 59 minutes (99:59]. Time will be displayed in minutes and
not in seconds. THE TIMER DOES NOT CONTROl= THE
OVEN.
1. Press the Timer pad.
, 0:00 wiii light and the colon {:] wiii flash in the display.
2. Press the More+ or Less- pad until the desired time is
displayed.
, The timer will begin as soon as the time is set.
, The flashing colon indicates that a timing operation is in
progress. (The colon wiii not flash if the time of day or
oven temperature is displayed.]
, Two short beeps signal the end of the operation. "0:00"
wiii appear in the display.
If desired, press the Clock pad and the time of day wiii
briefly reappear in the display during a timing operation.
If desired, press the Bake or Broil pads and the current
temperature setting wiii briefly reappear in the display
during a timing operation.
To cancel the timer operation:
Press and hold the Timer pad for several seconds.