Table of Contents
Advertisement
11. Zoning
From the Engineer's remote you can control the gains for several "zones". A zone is defined
as a collection of up to eight outputs. When controlling the gain for a zone from the remote,
the gain-settings will be applied to each output the zone contains.
You can open the zone-settings window from the "edit" menu located in the menu bar.
You can select any of the eight zones from the top-selection list. The lists on the bottom of
the window show the outputs in the currently selected zone and the outputs that don't have
a zone assigned to them. Select any of these outputs by clicking on them, and use the "Add"
All material © 2007. Martin Audio Ltd. Subject to change without notice.
43
Advertisement
Table of Contents
