Table of Contents
Advertisement
The short description in the bottom half of this window describes exactly which parameters
will be stored in the new preset. After selecting a name for the new preset, it will be stored
to the Engineer and you can use it straight away.
Besides storing your preset to the Engineer, you can also export or import it from a file.
Please note that preset files cannot be loaded as a project: They can only be imported to an
existing project.
The project settings to the left of the window are quite straightforward: You can save or load
a collection of presets from/to a file or synchronize the project with the device. The project
title is there for convenience, it will be stored to the device so you can recognize the project
stored on it easily.
Martin Audio Presets
The Engineer Software CD ROM also contains a folder containing a library of System Presets
with parameters for all Martin Audio cabinets. These are also available on the Martin Audio
User Guides and from the Martin Audio website; www.martin-audio.com.
All Presets contain Crossover, EQ and Limiter settings where applicable and all have the
parameters for one cabinet only. Using the copy and paste function it is very easy to
duplicate settings over to additional channels.
It is also possible to combine 2 or more different presets to build a project using a number
of different Martin Audio speakers. To do this you use a combination of the Channel Copy
and Paste function and the Replace Current button in the Project and Preset Control window.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
37
Advertisement
Table of Contents
