Martin Audio ENGINEER User Manual page 19

Now if we put that same 50 Hz sine wave through the Basscreator algorithm and analyse its
output we then see the picture below. We see that the original 50 Hz sine wave has been
replaced with higher harmonics on 100,150,200 and 250Hz in a certain ratio. To our brains,
this harmonic pattern will "sound" as if there was a 50 Hz tone.
To start using the basscreator you should first route the inputs you want to use it on toward
the Basscreator module in the Routing and settings window. Then click the "BCR" button in
the same window to open up the Basscreator control window.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
19