Table of Contents
Advertisement
9. Project-and preset management
An Engineer project can be defined as a set of multiple presets that can be recalled at will.
Each preset contains a set of configuration parameters, as described above. Presets can be
made up out all of these parameters, or a limited set of parameters for a specific part of the
device:
Preset type
System settings
Engineer settings
Operation settings
Noise emission settings
Of course there's always the possibility of storing presets as a whole by using "total"
presets. Presets can be recalled using either the software or the Engineer remote control. In
the software, you can access the project and preset window from the file menu:
From this menu, shortcuts to save (export) or load (import) an existing project from file are
also available, as well as an option to synchronize your device to the software. Selecting
"project and presets" will open up the following window:
All material © 2007. Martin Audio Ltd. Subject to change without notice.
Definition
All output parameters: Crossovers, output EQ's, output
delays, gains and limiters
All parameters described in the Engineer advanced control
window
All input parameters: Input gains, EQ's, simple settings for
the engineer (bass, treble and gain)
All routing settings and basscreator settings
35
Advertisement
Table of Contents
