Related Manuals for Abus SECVEST FUAA50100
Summarization of Contents
Quickstart Guide
Target Audience
Identifies intended users for installer instructions, focusing on menu navigation.
Installing Secvest
Describes the installation process in the "Mounting/Installation" chapter.
Configuring Secvest
Refers to the "Configuration" chapter for system setup details.
Secvest Function Test
Outlines steps for a comprehensive function test of the system and components.
Safety Information
Explanation of Symbols
Lists and explains symbols used in the manual and on the device for safety warnings.
Intended Use
Specifies the authorized purpose of the device and warns against unintended uses.
General Safety Instructions
Provides general safety instructions, including danger warnings and guarantee conditions.
Mounting Location of the Alarm Panel
Positioning the Wireless Alarm System
Provides guidance on selecting an optimal and safe location for mounting the alarm panel.
Device Overview
Device Front
Identifies and explains the functions of buttons and the display on the front of the device.
Device Rear (Mounting Plate)
Details the connections and components on the rear of the device and mounting plate.
Introduction
Terms and Definitions
Provides definitions for technical terms used in the manual.
Mounting/Installation
Connection Overview, Terminal Block
Details the connections available on the terminal block of the alarm panel.
Fixing the Mounting Plate
Details the steps and safety precautions for physically mounting the plate to the wall.
Connecting the Components
Installing an Optional Wireless Mobile Module
Instructions for installing an optional wireless mobile module into the PCB.
Installing the Micro SD Card
Steps for inserting and ensuring correct placement of the micro SD card.
Final Steps and Housing Changes
Final checks, connections, and procedure for changing the housing front panel.
Commissioning
Initial Commissioning/Factory Reset
Guides through the first-time setup wizard and factory reset process.
Logging into the Wireless Alarm System
Provides instructions on how to access the system via web browser.
Configuration
Menu Control Elements
Identifies and explains the purpose of various menu elements on the interface.
Login Screen
Details the username and password fields required to access the configuration interface.
Main Menu Options
Provides an overview of the main menu sections for system configuration.
Detectors
IP Zones Configuration
Details the configuration and management of IP zones for network cameras and devices.
Wireless Zones
Adding and Deleting Detectors
Instructions for adding or deleting detectors from wireless zones.
Wired Zones
Delete All Wired Zones
Instructions for deleting all wired detectors and zone information from the alarm panel.
Wireless Control Panel
Adding a Wireless Control Panel
Steps to teach in and add wireless control devices to the system.
External Sirens
Wireless Sirens Configuration
Instructions for adding, editing, and deleting wireless sirens.
Indoor Sounder
Adding and Editing Indoor Sounders
Steps to add, edit, and delete indoor sounders from the alarm panel.
Info Module/Indoor Siren
Adding Info Modules/Indoor Sirens
Procedure for adding indoor sirens or info modules to the alarm panel.
WUM (Wireless Universal Module)
Adding a Wireless Universal Module
Steps to add wireless universal modules (WAM) to the system.
Door Locks
Adding Door Locks
Steps to add door locks to the alarm panel.
RF Repeater
Adding and Editing RF Repeaters
Steps to add and configure RF repeaters, including their name and repeat functions.
Outputs
Radio Outputs Configuration
Configuration of radio (wireless) outputs, including editing, polarity, and type selection.
Wired Outputs Configuration
Configuration of wired outputs, including editing, polarity, and type selection.
Combination Outputs Configuration
Configuration of virtual logical elements combining multiple inputs for custom outputs.
Partitions
Configure Partitions
Settings for configuring partitions, including complete arming and exit modes.
System
General System Settings
General system settings including language, display text, and default configurations.
Installer Details Configuration
Configuration of installer name, code, and contact information for system access.
User Access Management
Controls user access levels and features like memo recording and dual key functions.
User Reset Configuration
Defines circumstances for user resets of system alarms or tampers.
Confirmation Settings
Configures confirmation modes (Basic, DD243, BS8243) for alarm events.
Hardware Settings
Settings related to hardware components like zone types, siren options, and batteries.
Security Settings
Configuration of security parameters like supervision, jamming, and remote updates.
Panel Upgrade Process
Procedure for upgrading the alarm panel software.
Backup and Restore Configuration
Options for backing up and restoring system configurations.
Report Generation
Generates and prints system configuration reports.
Communication
Network Setup
Configuration of network settings for IP-based communication.
IP Mobile Setup
Configuration of APN, username, password, and IP gateway for mobile network access.
Email Setup
Configuration of email server details for sending notifications.
VoIP Dialer Setup
Configuration of SIP server details, user IDs, and ports for VoIP calls.
ARC Reporting
Configuration of ARC reporting parameters including call mode, protocol, and recipients.
Encryption Configuration
Configuration of message encryption length and keys for secure ARC/ESCC transmissions.
Communication Options
Settings for handling communication line failures and remote control via telephone.
Contact Management
Defines recipients for various communication types and their contact profiles.
Test Functions
Walk Test
Performs a walk test on detectors to check signal strength and functionality.
Keypad Testing
Tests the functionality of the keypad buttons on the alarm panel and web interface.
Sirens and Sounders Testing
Tests the activation of internal and external sirens and sounders.
Wireless Control Panel Testing
Tests the functionality of wireless control panels and their button responses.
Signal Strengths Check
Checks the received signal strengths of wireless components for communication quality.
ARC Reporting Test
Tests ARC reporting by sending test calls via different communication paths.
Appendix
Technical Data
Provides detailed technical specifications for the Secvest system and its components.
Protection and Security
Details security levels, tamper protection, access codes, and locking mechanisms.
Connections
Details the various connection interfaces on the alarm panel, including power and communication.
Compatible Equipment
Lists compatible radio devices, including detectors, sirens, and locks, with article numbers.
Wired Components and Accessories
Lists compatible wired components like IP cameras, communication modules, and PSUs.
Default Values and Factory Defaults
Lists default settings for various system components and configurations.
Troubleshooting
Manual Restart Procedure
Guides on how to perform a manual restart of the alarm panel.
Need help?
Do you have a question about the SECVEST FUAA50100 and is the answer not in the manual?
Questions and answers